pressure in the radiator from cranking
05-17-03, 05:27 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2003
Location: Arlington, TX
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
pressure in the radiator from cranking
I just purchased a dead 90 model RX7.
During the attempt to crank it heard something funny around the radiator only to later see a mist in the air after I removed the radiator cap and tried to start it.
I just want to confirm that I've got a blown seal between the housings and I need to pull it out for a rebuild.
Also are the s4 and s5 short blocks interchangible as I'm thinking of grabing an s4 for $400 as a temp fix while I rebuild this one.
-thanks all
Bret
During the attempt to crank it heard something funny around the radiator only to later see a mist in the air after I removed the radiator cap and tried to start it.
I just want to confirm that I've got a blown seal between the housings and I need to pull it out for a rebuild.
Also are the s4 and s5 short blocks interchangible as I'm thinking of grabing an s4 for $400 as a temp fix while I rebuild this one.
-thanks all
Bret
Thread
Thread Starter
Forum
Replies
Last Post
