porting question.
#1
Junior Member
Thread Starter
Join Date: Nov 2011
Location: puertorico
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
porting question.
How to port without template?....any mesurements info....or any tecnical info?...i know the best way is buy templates from rb or pineaple but if i like to do alone without template?
#2
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
why not make a template yourself and then that can be used to create uniform ports on your housings?.
I'd be worried about making one bigger than the other,.This way you make them pretty well the same.
I'd be worried about making one bigger than the other,.This way you make them pretty well the same.
#4
Moderator
iTrader: (3)
so what's the issue then?
the main issue is what Misterstyx69 said ... uniformity. also like he said, you can always make your own for FREE. download a degree wheel for FREE and i'm sure you must use something in your house that has a decent-sized cardboard box. it will take some time, but in my opinion, free-handing it is simply not worth it.
the main issue is what Misterstyx69 said ... uniformity. also like he said, you can always make your own for FREE. download a degree wheel for FREE and i'm sure you must use something in your house that has a decent-sized cardboard box. it will take some time, but in my opinion, free-handing it is simply not worth it.
#6
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
If it's your first time, buy a template.
Port shape is the easiest part though. The finesse is the transition from the port to the runner and smoothing out the bowl without making it larger.
Port shape is the easiest part though. The finesse is the transition from the port to the runner and smoothing out the bowl without making it larger.
Thread
Thread Starter
Forum
Replies
Last Post