Peripheral port squeaking not starting
#1
Junior Member
Thread Starter
Join Date: Dec 2015
Location: North jersey
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Peripheral port squeaking not starting
I was putting all new gaskets in my 13bpp ida by geneburg.. adjusting fuel pressure almost had it going..wasn't started in a while.. now just a loud Squeak when I turn the key and that's it ! Did the starter go and not grabbing ? From so much fussing trying to get it to start ? Or what went on it while trying to get it going?
#2
like a compression squeak?
a mechanical squeak, an electrical squeak?
does the engine turn fully by hand?
does the engine turn fully by starter?
is your battery fully charged?
what kind of ignition?
what kind of car?
what
a mechanical squeak, an electrical squeak?
does the engine turn fully by hand?
does the engine turn fully by starter?
is your battery fully charged?
what kind of ignition?
what kind of car?
what
#3
Junior Member
Thread Starter
Join Date: Dec 2015
Location: North jersey
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
91 rx7 fc3s 13bpp 48 ida carb
Squeak / scratch coming from bottom end
#5
heynoman
iTrader: (5)
What do you consider the bottom end ??? Like the oil pan ?? Add more to your description. So does the engine turn when you hit the starter switch. You can even try posting a video it might help us better help you. at this point it's kinda a guessing game. Might be the carb pulling air thru some where a gasket was replace.
Thread
Thread Starter
Forum
Replies
Last Post
koopz
2nd Generation Specific (1986-1992)
12
05-07-16 08:42 AM
Josh King
New Member RX-7 Technical
2
05-03-16 01:34 PM