General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

No Spark to Plugs

Thread Tools
 
Search this Thread
 
Old Sep 4, 2014 | 04:24 PM
  #1  
Qryan11's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: Jan 2013
Posts: 4
Likes: 0
From: Tehachapi, CA
No Spark to Plugs

So I have a 1986 FC N/A. After an oil change I started the car and went for a drive, turned the corner and she sputtered and died. Car wont start but it is sounding like she wants to, Battery is charged, starter is working but there is no spark getting to the plugs. I have tried different plugs but to no avail. somebody I took the car to before flooded It out to the point gas came out of the intake but i have deflooded it since then so i am back to no spark at plugs and the smell of fuel when trying to start the car up. Any Ideas?
Reply
Old Sep 4, 2014 | 07:17 PM
  #2  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
Chances are the 40 amp EGI INJ fuse blew in the engine fuse box. If it were good, the Black/Yellow wire at the lead coil would have 12 volts w/key to on.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
May 9, 2016 07:06 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
The1Sun
1st Generation Specific (1979-1985)
0
Sep 7, 2015 10:21 PM




All times are GMT -5. The time now is 01:28 PM.