General Rotary Tech Support Use this forum for tech questions not specific to a certain model year

need ignition help asap

Thread Tools
 
Search this Thread
 
Old 05-02-13, 06:59 PM
  #1  
Full Member
Thread Starter
iTrader: (1)
 
bigred84's Avatar
 
Join Date: Oct 2011
Location: ohio
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
Exclamation need ignition help asap

i have an 84 gsl se. it has an 87 13b n/a engine that was just rebuilt, using se wire harness,injectors,dizzy,ecu and an fc leading coil upgrade. the leading coil isn't firing at all,but the trailing is. the engine cranks and is getting fuel. i even hooked back up the stock leading coil and nothing. when i connected my test light to the + and to the - power wires to the coil,it doesn't light up. my brain hurts from trying to diagnose this issue.
here's what i've done and checked:

replaced:
igniter,coil,ecu,wires,plugs

checked:
grounds,power to coil(12v),all connecters and wires,voltage from ecu,magnetic pickup gap,power and spark from trailing side, cap and rotor
Old 05-02-13, 07:59 PM
  #2  
ROTORIST
iTrader: (7)
 
alfajeffrey's Avatar
 
Join Date: May 2012
Location: Virginia
Posts: 230
Likes: 0
Received 0 Likes on 0 Posts
Sounds similar to the problem I was having. Have you tried posting in Generation specific forum.

I ended up replacing rotor, dizzy cap, wires, plugs, and battery terminals.

I also rebuild the carb, but mainly cause i saw fuel stain-age on the insulator.

She runs strong now.
Old 05-02-13, 08:06 PM
  #3  
Full Member
Thread Starter
iTrader: (1)
 
bigred84's Avatar
 
Join Date: Oct 2011
Location: ohio
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
the cap and rotor are firing the trailing plugs only and there spark. i have a modified fc leading coil firing the plugs directly and no spark. the car started and ran awesome before i blew a coolant seal and lost compression. i tried the other good fc coil that i have and nothing.
Old 05-07-13, 04:47 PM
  #4  
Junior Member
 
itr78's Avatar
 
Join Date: Apr 2013
Location: SoCal
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
did you fix your issue bigred84?
i have the same exact issue - freshly rebuilt engine, tried to adjust the timing this morning and i'm not getting a spark from the leading plugs. will test the leading coil later tonight - didn't have time this morning, and will test the plug wires as well as change out the plugs. i'm hoping it's the plug wires, i ordered a new set that's on it's way anyway, but worry it's the distributor/coil..
Old 05-07-13, 07:59 PM
  #5  
Full Member
Thread Starter
iTrader: (1)
 
bigred84's Avatar
 
Join Date: Oct 2011
Location: ohio
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
no,still won't start. a buddy came over today and he left wondering, what the ****? the leading is sparking and now the trailing won't fire. i'm completely baffled. it did this before and it fixed itself somehow. i'm not sure if it's in the ecu or not. my spare didn't help at all. i'm about to give up on the car,honestly.
Old 05-08-13, 08:48 AM
  #6  
Junior Member
 
itr78's Avatar
 
Join Date: Apr 2013
Location: SoCal
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
could be the distributor? you have a spare one to test out with? your coils tested ok? for me i think it might be the coil - i swapped the two and lost spark on the trailing instead.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WANKfactor
1st Generation Specific (1979-1985)
6
09-29-15 01:14 PM
GKW
1st Generation Specific (1979-1985)
5
09-28-15 04:34 PM
subeone
General Rotary Tech Support
0
09-24-15 09:58 PM



Quick Reply: need ignition help asap



All times are GMT -5. The time now is 12:39 AM.