RX7Club.com - Mazda RX7 Forum

General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

need help fast flywheel and counter?

Thread Tools
 
Search this Thread
 
Old Mar 10, 2006 | 03:05 PM
Share
  #1  
rotorysuzuki's Avatar
rotorysuzuki
Thread Starter
the rxzero
Tenured Member 05 Years
 
Joined: Dec 2003
Posts: 363
Likes: 1
From: allentown PA
need help fast flywheel and counter?
I am putting a 13bre in a samurai I want to use a 1st gen trans because I allreday had 1 I have an 87 13b can I swap the front counter weight and use the 87 flyuwheel?
Reply
0
Old Mar 10, 2006 | 03:19 PM
Share
  #2  
C. Ludwig's Avatar
C. Ludwig
www.lms-efi.com
Tenured Member: 25 Years
Liked
Loved
iTrader: (27)
 
Joined: Mar 2001
Posts: 5,269
Likes: 147
From: Floyds Knobs. IN
No. The rotors are different weights. The S5 NA rotors and S5/S6 turbo rotors are the same weight. You should be able to use the S5 NA flywheel with that rotating assembly.
Reply
0
Old Mar 10, 2006 | 04:01 PM
Share
  #3  
rotorysuzuki's Avatar
rotorysuzuki
Thread Starter
the rxzero
Tenured Member 05 Years
 
Joined: Dec 2003
Posts: 363
Likes: 1
From: allentown PA
is that 1 smaller to fit in the bellhousing?
Reply
0
Old Mar 11, 2006 | 04:45 AM
Share
  #4  
C. Ludwig's Avatar
C. Ludwig
www.lms-efi.com
Tenured Member: 25 Years
Liked
Loved
iTrader: (27)
 
Joined: Mar 2001
Posts: 5,269
Likes: 147
From: Floyds Knobs. IN
Yes. All the NA flywheels will work with that tranny as far as diameter. But you need to have the flywheel properly weighted to match the rotors. Read this. It may help.

http://www.mazdatrix.com/f-writng.htm
Reply
0
Old Mar 12, 2006 | 04:37 PM
Share
  #5  
mono4lamar's Avatar
mono4lamar
In the burnout box...
Tenured Member 10 Years
iTrader: (32)
 
Joined: Oct 2003
Posts: 4,453
Likes: 2
From: New York
2nd and 3rd gen flywheels are pretty much the same right? i have a racing beat im looking to sell with a new counter weight and hardware. pm me if interested
Reply
0
Old Mar 12, 2006 | 09:28 PM
Share
  #6  
rotorysuzuki's Avatar
rotorysuzuki
Thread Starter
the rxzero
Tenured Member 05 Years
 
Joined: Dec 2003
Posts: 363
Likes: 1
From: allentown PA
I put the s5 flywheel on and it works
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
84SE Engine Swap Success! Surge at idle, clutch out.
LongDuck
1st Generation Specific (1979-1985)
12
Oct 7, 2015 08:12 PM
Back to Subforum
General Rotary Tech Support
View Next Unread
FREE Microsoft Streets CDN$349




Advanced Search

All times are GMT -5. The time now is 03:07 AM.