General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

need help badly

Old Feb 27, 2014 | 09:38 PM
  #1  
tuozheng's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: Feb 2014
Posts: 2
Likes: 0
From: welland
ON need help badly

Im a totally starter here, badly need help...Here is the whole story.

I got this 92 FD3S Oct 2013, the day I got it, took it for a test drive. Got misfire in the exhaust pipe. And second day I tried to start it, failed. I left the car in the garage for the winter and didn't touch it. And its getting warm these days, I tried to start it, crank, but wont start. Here is a link I took:


The wired part is, I read some threads about engine flooded and some ways to unflooding.

I tested the spark plugs few days ago, and all work.

I pull the fuel fuse out and turned the engine, 1 min later try again, then put the fuse back.

Still, the engine wont start. Trying to get some useful help before I go crazy..

Thank you all guys, leave a message here or PM me are all good. Thanks!!
Reply
Old Feb 27, 2014 | 10:16 PM
  #2  
oppa637's Avatar
Rotary Enthusiast
Tenured Member: 15 Years
iTrader: (6)
 
Joined: Feb 2009
Posts: 1,247
Likes: 6
From: Houston
You checked spark, what about fuel?
Reply
Old Mar 1, 2014 | 12:33 PM
  #3  
tuozheng's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: Feb 2014
Posts: 2
Likes: 0
From: welland
@oppa637 I've put about 30L gas in it. When i tested spark plugs I can smell the gas, and after I clean, dry the plugs put it back in, start the car, pull the plugs out, there was lots of gas on the plugs...
Reply
Old Mar 2, 2014 | 02:19 PM
  #4  
cdn's Avatar
cdn
Full Member
 
Joined: Jan 2014
Posts: 75
Likes: 0
From: Parksville, British Columbia
It's possibly your injectors...they could be dumping fuel into your engine. Oughta listen for a clicking sound when turning over the engine (or trying to anyway). You should hear a click, if you hear a dull click then it would definitely be a dirty injectors that would no doubt be causing the leaks.

Hope that helps!
Reply
Old Mar 2, 2014 | 07:30 PM
  #5  
oppa637's Avatar
Rotary Enthusiast
Tenured Member: 15 Years
iTrader: (6)
 
Joined: Feb 2009
Posts: 1,247
Likes: 6
From: Houston
Try unplugging the fuel pump fuse. Dump some starter fluid in the intake. If it trys to start, you know your ignition is fine. Then check to see if your fuel pump is working, if it is, sounds like your injectors might be the problem.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
squirrels
1st Generation Specific (1979-1985)
10
Sep 1, 2024 09:52 AM
Logan Reinisch
General Rotary Tech Support
44
Sep 17, 2018 12:20 PM
Jmolina0163
1st Generation Specific (1979-1985)
10
Oct 3, 2015 10:04 AM
Jmpabon93
New Member RX-7 Technical
1
Sep 30, 2015 04:57 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:36 PM.