My car still sucks..help please!...
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Jan 2010
Location: Alberta, Canada
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
My car still sucks..help please!...
For my 13bt corolla. Before I left on vacation about two weeks ago, I was moving my car a couple meters, and I barely had the intercooler on when I was backing it up the intercooler fell off and the car died, I put it back on tight and remounted it and the car still ran like ****.
I can somewhat get it started and have it idle ok then I rev it up and it kinda sounds even more raspy than usual and it backfires then when I let off the idle drops too like 250 then it slowly dies..
not too mention I never ever did sort out why my secondaries werent firing.
wtf is going on, engine toast?? its getting depressing working on this thing, I keep going backwards it seems....
I can somewhat get it started and have it idle ok then I rev it up and it kinda sounds even more raspy than usual and it backfires then when I let off the idle drops too like 250 then it slowly dies..
not too mention I never ever did sort out why my secondaries werent firing.
wtf is going on, engine toast?? its getting depressing working on this thing, I keep going backwards it seems....
#2
Enthusiast
iTrader: (2)
help in deed
Are you TMIC or FMIC?
FMIC- most likely unrelated from intercooler falling off.
TMIC- Try this get the car idling then spray carb clean around the exten-plenum and vacuum line's, assembly's. Most likely something has just falling apart do to the jolt of the TM falling off its place. unplugging the small 3:16th vacuum line's going into the hard lines.
let us know how that work's out always here to help.
Jason S.
F.R. Rocket's L.L.C.
Greenwich NY 12834
518.514.8787
frrocketsinc@aol.com
FMIC- most likely unrelated from intercooler falling off.
TMIC- Try this get the car idling then spray carb clean around the exten-plenum and vacuum line's, assembly's. Most likely something has just falling apart do to the jolt of the TM falling off its place. unplugging the small 3:16th vacuum line's going into the hard lines.
let us know how that work's out always here to help.
Jason S.
F.R. Rocket's L.L.C.
Greenwich NY 12834
518.514.8787
frrocketsinc@aol.com
#3
Full Member
Thread Starter
iTrader: (1)
Join Date: Jan 2010
Location: Alberta, Canada
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
FMIC, it seems like it happened immediately after it fell off.
but
it doesnt even start now, I double checked all my I/C couplers are tight and I havent changed any vac lines since it ran good
but
it doesnt even start now, I double checked all my I/C couplers are tight and I havent changed any vac lines since it ran good
Thread
Thread Starter
Forum
Replies
Last Post
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM
smikels
2nd Generation Specific (1986-1992)
3
08-18-15 01:26 PM