Looking for Engine Info
#1
Newbie
Thread Starter
Join Date: Aug 2005
Location: Colorado
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Looking for Engine Info
I have done a search and couldn't find quite what I was looking for.
I am looking for a rotary engine and I am not quite sure which car to look for it in. I am actually looking for a mostly complete car, but ultimately I only need the engine.
I am not looking for power. It needs to be fuel injected, and the lighter the better. Reliability is also a concern, but not as critical as the EFI. Turbo is not necessary, but I would consider it if I found one
Any suggestion for the best motor / car to look into would be appreciated. Specifically what year (I assume the car will be an RX-7). Anything else I should be aware of if looking for a specific type of motor would be appreciated.
Thanks in advance.
Newb
I am looking for a rotary engine and I am not quite sure which car to look for it in. I am actually looking for a mostly complete car, but ultimately I only need the engine.
I am not looking for power. It needs to be fuel injected, and the lighter the better. Reliability is also a concern, but not as critical as the EFI. Turbo is not necessary, but I would consider it if I found one
Any suggestion for the best motor / car to look into would be appreciated. Specifically what year (I assume the car will be an RX-7). Anything else I should be aware of if looking for a specific type of motor would be appreciated.
Thanks in advance.
Newb
#3
Newbie
Thread Starter
Join Date: Aug 2005
Location: Colorado
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by diabolical1
welcome ...
any Gen II (1986-92) Rx-7 should fit the criteria you seek.
any Gen II (1986-92) Rx-7 should fit the criteria you seek.
That's what I was looking for, thank you. Just out of curiosity: What is the designation of that engine (E.g. 12a, 13b or 20b)?
Thanks again.
#5
Newbie
Thread Starter
Join Date: Aug 2005
Location: Colorado
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Cool, thanks for the information.
I'm sure I will eventually have some more questions, and will post them in the corresponding forums when they come up.
I will also post pictures of what this is going to be after it runs and drives.
Thanks again for helping out the Newbie.
I'm sure I will eventually have some more questions, and will post them in the corresponding forums when they come up.
I will also post pictures of what this is going to be after it runs and drives.
Thanks again for helping out the Newbie.
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
3
08-20-15 10:24 PM
rx8volks
Canadian Forum
0
08-13-15 04:55 AM
rx8volks
Canadian Forum
0
08-11-15 10:30 PM