Innovate LM-1 Wideband outputing to a gauge...
#1
Innovate LM-1 Wideband outputing to a gauge...
Hey guys,
I have a Innovate LM-1 Wideband oxygen sensor so that I can record my afr's. But im trying to get a gauge that I can mount in the dash so I can with ease visually see the current afr.
I know the LM-1 has a output to another gauge so I was thinking about going with the XD-16 gauge to display it. But then I was thinking, im going to be using the Autometer Cobalt series of gauges, would a autometer Cobalt AFR gauge be able to hook up to the LM-1 output?
Thanks
Dan_s_young
I have a Innovate LM-1 Wideband oxygen sensor so that I can record my afr's. But im trying to get a gauge that I can mount in the dash so I can with ease visually see the current afr.
I know the LM-1 has a output to another gauge so I was thinking about going with the XD-16 gauge to display it. But then I was thinking, im going to be using the Autometer Cobalt series of gauges, would a autometer Cobalt AFR gauge be able to hook up to the LM-1 output?
Thanks
Dan_s_young
#3
Yes but then you can't datalog (with the PLX-M300 that is), with the LM-1 I know for a fact you can use the XD-16 for a gauge, im just wondering about other gauge options. It would look a little funny with all the autometer cobalt gauges and then a white faced XD-16.
#6
No, most AFR gauges(autometer) are set up for narrowband 0-1v inputs from a narrowband O2 sensor. You would have to contact the manufacturer about what signal their gauges are set up for...
Check these out:
http://www.haltech.com/wideband_lambda.htm
Check these out:
http://www.haltech.com/wideband_lambda.htm