I need some help. I was wiring in the 1600cc injectors for my 93 FD and I got the rear rotor's injector in, but the wiring harness was mangled before I got the car, so I was curious what color wires are on the stock front secondary injector? Thanks to anyone who could help out.
Mike

 

If no one answers before I get home, I'll let you know. My harness is out of the car right now.

 

Front is the light green with a white stripe and silver hash mark. Rear is the same without the stripe. Both have a common ground.

 

Thats what I figured from the wiring diagram. Somehow that light green with the white stripe and silver hash mark is already wired to another connector that goes to my water jacket, with a green plug. I'll figure it out today.
Mike

 

No no no no....don't swap them. That's a DARK green wire with the same markings. You move them and bye bye motor. Take into account that the wiring is old and has been through some abuse. You won't get color fade so much as crap on the wire that could distort the color.

 

That's what I thought, the light green is more like a pea soup color. I found it way back near the firewall, but I have yet to trace it to the sec injector, all I know is that it does not go where I want it to. I'm going to have to cut the harness apart to find out. Thanks again.
Mike