General Rotary Tech Support Use this forum for tech questions not specific to a certain model year

I need to rebuild? (90%shure)

Thread Tools
 
Search this Thread
 
Old 10-22-06, 07:54 PM
  #1  
Junior Member

Thread Starter
iTrader: (4)
 
BlueByrd's Avatar
 
Join Date: Jun 2005
Location: San Diego
Posts: 19
Received 0 Likes on 0 Posts
I need to rebuild? (90%shure)

Well I have had my fd for about a year, and have been slowly bringing her back to life and learning about the car at the same time. I now loose coolant everytime that I park the car (overflow). Here are the specifics of what I have tested:
-Thermostat housing, AST caps have been replaced.
-Pressure test to the cooling system seems ok. If I take it up to 15 psi i might loose .5-1.0 psi over a period of 8 hours. ( I don't have the right adapter for the thermostat housing so I tested it at the aftermarket AST.)
-No trouble starting the car, never runs rough, no smoke at startup, though I still have the main cat (if that would affect things).
-Champagne bubble test I get lots of tiny bubbles (like carbonation) at idle(87 C). If I tug the throttle cable a bit, I get a couple of large bubbles to come out every time.

Like I said, I am 90% sure that I need to rebuild. I was just wondering if there was anything that I might be overlooking?

all help/comments appreciated.
Old 10-23-06, 11:13 AM
  #2  
BMW Tech

 
White94RX's Avatar
 
Join Date: Mar 2002
Location: Auburn, Alabama
Posts: 845
Likes: 0
Received 0 Likes on 0 Posts
Sounds like you got an O-ring seal leaking.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Vartok
2nd Generation Specific (1986-1992)
16
10-08-15 04:49 PM
musker
New Member RX-7 Technical
1
10-01-15 05:58 PM



Quick Reply: I need to rebuild? (90%shure)



All times are GMT -5. The time now is 12:31 PM.