Lil help?

 

Um....

 

1. remove spark plug with socketwrench.
2. replace and tighten down with socketwrench

PS if you do anymore steps something is wrong

 

hehe..
Where is spark plugs?

 

Replacing the spark plugs is much easier if you work from under the car.

Put the front of the car on jack stands.

Go under car's engine compartment on the driver's side and you'll see the spark plugs.

Pull only one wire and plug at a time so you do not connect the wrong wire to the wrong plug.

Always put "antisieze" compound on the threads of the new spark plug before installing.

Done and done!

 

where can i get that antiseize compound?

 

The same place that sells you the spark plugs should have the antiseize compound, just ask them.

 

one thing you might want to try is when you get one out start your car and place sparkplug on tounge that is a good way to tell if it works or not

 

Thanks for the tip coache

*** off!