HELP!! Major smoke problems
#1
Full Member
Thread Starter
Join Date: Apr 2005
Location: Medicine Hat, Alberta, Canada
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
HELP!! Major smoke problems
I have a 88 Turbo 11 it is hard to start and when you rev it up it puts out major smoke. The smoke is more gray than blue. Can someone tell me what might be wrong?? I don't know much about rotary engines. Also how hard would it be to convert a non turbo engine to turbo? I have a good rebuilt non-turbo in a wreaked rx7 GXL.
#4
EliteHardcoreCannuckSquad
Join Date: May 2001
Location: Acton, Ontario, Canada
Posts: 4,126
Likes: 0
Received 4 Likes
on
4 Posts
Well, I had a similar problem on my GSL-SE.
Turns out the problem was the water temp sender.
I don't know if it's the same in a 2nd gen, but in a first gen, if the ecu doesn't get a signal from the WTS, it locks the fuel injectors open. Fuel just keeps dumping in.
In my case, the connector for the WTS had broken.
Turns out the problem was the water temp sender.
I don't know if it's the same in a 2nd gen, but in a first gen, if the ecu doesn't get a signal from the WTS, it locks the fuel injectors open. Fuel just keeps dumping in.
In my case, the connector for the WTS had broken.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM