General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

Has any one ever had this problem?

Thread Tools
 
Search this Thread
 
Old Dec 15, 2001 | 04:28 PM
  #1  
kevinmfaust's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 138
Likes: 0
From: Smyrna Ga.
Has any one ever had this problem? 3rd gen

3 rd gen. When I am under heavy boost (above 10 pounds) I get a heavy gas smell inside the car and I can hear the sound of rushing air. It sounds like it comes from around the drivers door sill or left side foot well panel. Before I pull apart the fuel evaporation system I am looking for any ideas. When I pulled off the A piller molding I found a hose that goes up the A piller over the door and back down under the storage bins. I did not take out the bins to follow it completely. This hose vents out of the car behind the front wheel. I dont know what the hose is but it is in the area that the sound is coming from. Any help? Thanks.
Kevin

Last edited by kevinmfaust; Dec 15, 2001 at 05:05 PM.
Reply
Old Dec 15, 2001 | 09:36 PM
  #2  
evot23's Avatar
Classy
Tenured Member 10 Years
iTrader: (17)
 
Joined: Feb 2001
Posts: 6,900
Likes: 2
From: Gainesville, FL
I hear the same noise above 10 psi too!!! It was driving me crazy but no loss in performance so I let it go. I have no idea about that tube. Don't ever remember it being there when i had the apillar off.

Cant find anything in the shop manual either.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WyomingTII
2nd Generation Specific (1986-1992)
12
Sep 28, 2015 10:32 AM
lnlreaper
2nd Generation Specific (1986-1992)
2
Sep 27, 2015 09:59 AM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM




All times are GMT -5. The time now is 01:00 PM.