Fuel Rail Pulsator
#1
Junior Member
Thread Starter
Join Date: Nov 2004
Location: Lincoln, NE
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Fuel Rail Pulsator
I started getting a lot of gas smell in the car, especially if I used the heater. so I took the car into the shop and they said it was 'a fuel rail pulsator?' So they fixed that, now we're looking for a plastic piece for a fuel injector. Anyone have similar problems? It added up to a chunk o change.
#2
Law Breaker
Join Date: Oct 2005
Location: S.F. Bay Area, California 510
Posts: 3,333
Likes: 0
Received 0 Likes
on
0 Posts
that was the pulsation dampner, the internal rubber seal wears down to the point that it starts to leak and drips onto the exhaust manifold, alot of FCs die this way. Is that plastic piece called an "air bleed" because they tend to break too. I'd say you'd prolly dropped about 150 for parts?
#6
If you search the forum you will find that it CAN be replaced with a banjo bolt in order to stop the leak. However, you will find differing opinions regarding how wise this is.