General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

FD isn't firing up, continuously cranks

Thread Tools
 
Search this Thread
 
Old Dec 30, 2012 | 03:35 PM
  #1  
havis_trowey's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2012
Posts: 10
Likes: 0
From: california
FD isn't firing up, continuously cranks

Hi so I have a 93 rx7 that isn't firing up, after driving it all around one day, then the next I go out to start it and it just keeps cranking without firing up. I checked the spark plugs, the crank sensors, the fuel pump, put extra gas in it, and it still is just cranking, I don't know what it is. Need to get it running soon, please any suggestions?
Reply
Old Dec 30, 2012 | 03:45 PM
  #2  
hahnlsquid's Avatar
Junior Member
 
Joined: May 2009
Posts: 3
Likes: 0
From: florida
one time i experanced this and it turned out to be a vacume line poped off the manifold...make sure all your vacume lines are good....also check your fuel pressure
Reply
Old Dec 30, 2012 | 05:58 PM
  #3  
havis_trowey's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2012
Posts: 10
Likes: 0
From: california
Originally Posted by hahnlsquid
one time i experanced this and it turned out to be a vacume line poped off the manifold...make sure all your vacume lines are good....also check your fuel pressure
Well I checked the ones i could see for now and they all seem to be fine, I mean like i said it was running great and i came home fine and then the next day it just wouldnt start up, so i cant figure out what would happen over night sitting to cause this...?
Reply
Old Dec 30, 2012 | 09:14 PM
  #4  
TurboMazdaSpeed's Avatar
1.3L piston eater
Tenured Member 10 Years
 
Joined: Nov 2006
Posts: 514
Likes: 3
From: Vancouver, Canada
getting spark ? fuel pump turning on? first things first check your fuses.. same **** happened to me once and it was a simple fuse lol
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FlatVermin
General Rotary Tech Support
22
Sep 27, 2015 05:42 AM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
Monsterbox
Adaptronic Engine Mgmt - AUS
5
Sep 11, 2015 03:29 PM
meetRoX7e
General Rotary Tech Support
4
Sep 11, 2015 11:09 AM




All times are GMT -5. The time now is 02:27 AM.