FC TII vs. NA..what's the difference?
01-22-05, 05:01 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2005
Location: Milpitas, CA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
FC TII vs. NA..what's the difference?
Hey guy, im looking to get a FC but i just wanna know whats the difference between a TII and an NA 
... I know of course a TURBO and stuff..(obviously) but like.. if i were to get a NA what EXACTLY would i need to do in order to get it to be identical to a TII. (insurance purposes..) any help? 
... I know of course a TURBO and stuff..(obviously) but like.. if i were to get a NA what EXACTLY would i need to do in order to get it to be identical to a TII. (insurance purposes..) any help?
01-22-05, 07:40 PM
#2
Oil burner.
Join Date: Dec 2004
Location: Ft.Lauderdale
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Im not sure how it is on this forum, I know the Honda-tech website would tell you to search. From my own knowledge...
Turbo2's have different motors(different internal compression), rotor housings(exhaust ports different), and side housings and intermediate housing, different intake and exhaust of course. Probably a different wiring harness to the motor. Different instrument clusters.
(boost takes place of volts???) The turbos have a different driveshaft, different(beefier trans),different ecu, different rear diff with different halfshafts(I think the outside spline is the same).ummm...Depending on if you have a 4 and 5 bolt set up with different brakes(depending on model line)....Other than that, thats about it... maybe slightly different seats.
Turbo's also came with a aluminum lightweight spare, aluminum hood with scoop... Am I forgetting anything?
Peace
Turbo2's have different motors(different internal compression), rotor housings(exhaust ports different), and side housings and intermediate housing, different intake and exhaust of course. Probably a different wiring harness to the motor. Different instrument clusters.
(boost takes place of volts???) The turbos have a different driveshaft, different(beefier trans),different ecu, different rear diff with different halfshafts(I think the outside spline is the same).ummm...Depending on if you have a 4 and 5 bolt set up with different brakes(depending on model line)....Other than that, thats about it... maybe slightly different seats.
Turbo's also came with a aluminum lightweight spare, aluminum hood with scoop... Am I forgetting anything?
Peace
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM
acha3
2nd Generation Specific (1986-1992)
7
09-06-15 08:14 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM
