i was changing my clutch,and took the flywheel off,1 of 16 extremly long bolts was loose,i just pulled it out and the threaded end was broken with the rest of thread still in block.,and coolant poured out and stopped.
what is broken,this ins't normal.what should i do,is the motor shot?

 

That's one of the bolts that Holds the Irons and rotor housings together! Def Important. I doubt you'll be able to fix this without taking the motor out... You'll def need to get the broken portion out of the motor, and replace with a new bolt. Good luck... I have no idea how that happens. Unless someone didnt build the motor correctly.

 

Motor isn't shot, buit it will require a tear down to remove the broken tension bolt end. Depending on the mileage, you might get by with a gasket kit, but this is an opportune time to replace the seals and freshen up the engine. Depending on goals and budget, maybe a little port work while it's apart.