Carberated Back To Turbo?
01-30-13, 02:55 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2012
Location: Port Charlotte, Florida
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Carberated Back To Turbo?
I have a 1987 RX-7 Turbo II. When I bought the car someone before me took off the turbo intake and put on a carberator intake and a distributer is operating the ignition. What would I need to get to convert it back to turbo?
01-31-13, 03:09 AM
#2
Senior Member
Join Date: Apr 2011
Location: Lakewood, New Jersey
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
Turbo
Turbo mani
Turbo downpipe
Gaskets etc.
intercooler + piping
leading and trailing coils
boost sensor unless it wasnt removed
throttle body
throttle body spacer
intake mani
im sure theres more in forgetting. dont know what all goes into converting one to carbeurated in the first place.
Turbo mani
Turbo downpipe
Gaskets etc.
intercooler + piping
leading and trailing coils
boost sensor unless it wasnt removed
throttle body
throttle body spacer
intake mani
im sure theres more in forgetting. dont know what all goes into converting one to carbeurated in the first place.
01-31-13, 09:51 PM
#3
Junior Member
Thread Starter
Join Date: Nov 2012
Location: Port Charlotte, Florida
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Turbo
Turbo mani
Turbo downpipe
Gaskets etc.
intercooler + piping
leading and trailing coils
boost sensor unless it wasnt removed
throttle body
throttle body spacer
intake mani
im sure theres more in forgetting. dont know what all goes into converting one to carbeurated in the first place.
Turbo mani
Turbo downpipe
Gaskets etc.
intercooler + piping
leading and trailing coils
boost sensor unless it wasnt removed
throttle body
throttle body spacer
intake mani
im sure theres more in forgetting. dont know what all goes into converting one to carbeurated in the first place.
02-01-13, 11:48 PM
#4
Senior Member
Join Date: Apr 2011
Location: Lakewood, New Jersey
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
Alright man, thanks for the help. I know there's a lot more'm going to it than just that, I'm going to have to redo my fuel and air delivery too, plus injectors and other stuff. I'm probably going to order a turbo motor off eBay or JDM importer and even if it's blown I will still have all the turbo stuff all for less than $1,500 and rebuild the block so I have a new engine to put in my car when this one finally goes out.
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM