Carbed 13B in a Sand Rail????!!
#1
Newbie
Thread Starter
Join Date: Sep 2007
Location: Barstow, CA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Carbed 13B in a Sand Rail????!!
I am looking to get a 13B for my Chenowth sand rail. The car is only used in the desert and sand, so smog equipment and mufflers are not needed.
I am looking for 200 to 250HP with a carb. I wanna ditch the injection for the simplicity of a carb. I am just a bit confused on the porting and such. Street, Bridge, Cheese etc.
High RPMs and a funky idle are a plus!
What porting, carbs, exhaust will I need to make 200-250hp? Is it possible? Any help would be greatly appreciated!
I am looking for 200 to 250HP with a carb. I wanna ditch the injection for the simplicity of a carb. I am just a bit confused on the porting and such. Street, Bridge, Cheese etc.
High RPMs and a funky idle are a plus!
What porting, carbs, exhaust will I need to make 200-250hp? Is it possible? Any help would be greatly appreciated!
#2
Banned. I got OWNED!!!
your goal is definatly do-able, not too much dough either.. the only problem the carby sandrails run into is float bobble.. the fuel pours overthe float top and into the carb barrels(unmetered) in the whoops/ rough terrain, causing some stumbling from an overly rich mixture
#3
Newbie
Thread Starter
Join Date: Sep 2007
Location: Barstow, CA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I currently run a single Weber 44 on my 1915cc with no issues. Some of my friends with dual carbs have the float problems but the singles seem to work pretty good.
200-250 is doable with a carbed 13b?
200-250 is doable with a carbed 13b?
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
tiger18
3rd Generation Specific (1993-2002)
9
09-03-15 08:27 PM