General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

Car wont stay running!!! Help!!!

Thread Tools
 
Search this Thread
 
Old Jul 25, 2013 | 12:19 PM
  #1  
nickedsly's Avatar
Thread Starter
Full Member
Tenured Member: 10 Years
iTrader: (6)
 
Joined: May 2012
Posts: 88
Likes: 0
From: Western NY
I own a 1989 rx7 turbo2 w the following mods:

Rtek 1.8 chipped ECU
BNR Stage 2 turbo
740cc x4 Denso Fuel Injectors
Aeromotive Fuel Pressure Regulator
Walbro 255 fuel pump
Rising RPM fuel rails and emission block off plates
Clutch Masters Stage 4 clutch
Full stainless 3" downpipe and single exhaust Front Mount Intercooler
Godspeed Radiator
A/C removed
OMP removed

Here's a vid:

When it's pulsating I'm holding the gas down like 1/4 throttle. I have to pedal it to keep it running. It won't even idle but every couple starts. When I first started it this am everything seemed fine revved fine up to 7k (after warmed up of course). I go to take it down the street and i gotta pedal it to keep it running. I just put gas in it and a little isopropyl alcohol cause I thought it might be water in my gas. I didn't get fuel filter yet. I was replaced within last 6 months tho. It's all most like the airflow sensor is messed up, that or something with the fuel system. I did a compression test and everything was fine w that and injectors all have new seals. Idfk I can't figure this ish out so any help would be great. Thanks.
Nick

Last edited by nickedsly; Jul 25, 2013 at 12:41 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
highspeedrider
Introduce yourself
6
Aug 19, 2015 03:44 AM
smikels
2nd Generation Specific (1986-1992)
3
Aug 18, 2015 01:26 PM
meat_whistle
Introduce yourself
0
Aug 12, 2015 08:41 PM
Wolf_
Single Turbo RX-7's
3
Aug 11, 2015 04:23 PM




All times are GMT -5. The time now is 09:29 AM.