Burning Question
05-13-03, 11:54 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2001
Location: El Monte, CA
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Burning Question
My Car seems to be over heating. I have a 90 GTUs Nad I Just had it rebuild. The problem is that When I am driving The needle for temp goes up from the halfway point and starts to creep up. I turn off the car As soon as possible and the engine light does not come on or no buzzing. I have a fluidyne radiator and it has no leaks and the hoses seem fine no leaks! What can it be? Could it be the ECU sending wrong messages, The gauge just does not work? Is there a pug that is unplugged. The thersmostat is gone. or are the hoses collapsed from the inside. PLEASE HELP ME OUT GUYS pm ME OR answer this reply or email me at fc3chris@yahoo.com
05-15-03, 09:26 AM
#3
Queer
Join Date: Mar 2001
Location: Formerly in the Ass end of the pacific.
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
I think he meant the thermostat comment as a question.
Does the top rad hose get warm? Can you spin the water pump freely if you loosen the belts? What temp gauge are you using? Is your oil cooler hot?
Does the top rad hose get warm? Can you spin the water pump freely if you loosen the belts? What temp gauge are you using? Is your oil cooler hot?
Thread
Thread Starter
Forum
Replies
Last Post
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM
