bogging w/ 3800 hesitation
#3
Why am I here ?
Join Date: May 2002
Location: Boston, MA
Posts: 671
Likes: 0
Received 0 Likes
on
0 Posts
Check you TPS. Hesitation at all rpms is a sign of misadjusted or bad TPS.
You could also check you fuel filter.
the 3800 rpm hesitation is quite common I believe, it s when the secondary injectors are supposed to kick (under load, that is, if you accelerate hard). I think it's an electrical/ground issue. Do a search, you'll find plenty of info.
Get 88 FSM at www.fc3s.org under manuals
get "fuel and emissions system" section. It's a gold mine.
Regards,
Hugues -
You could also check you fuel filter.
the 3800 rpm hesitation is quite common I believe, it s when the secondary injectors are supposed to kick (under load, that is, if you accelerate hard). I think it's an electrical/ground issue. Do a search, you'll find plenty of info.
Get 88 FSM at www.fc3s.org under manuals
get "fuel and emissions system" section. It's a gold mine.
Regards,
Hugues -
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM