Apexi avc-r installation question
#1
Passenger
Posts: n/a
Apexi avc-r installation question
ok this is going to be a very vague question because I can't remember exactly what I needed to ask. Just try your best ok...Apexi avc-r-the directions say splice the purple wire into the wires in the ecu that are for rpms and something else-i can't remember right now. Problem is rpms and "that other thing" actually have 2 spots in the ecu. Where do I splice the purple wire into? I'll have a heart attack if someone can actually answer this question. Maybe splice into both? i donnu thanx
#2
Senior Member
What generation? This is for a 2nd gen. I guess if yours is a 3rd that you'll still have the wire there but, it might be a different color.
S-AVCR Purple (RPM)..., Run wire to yellow wired pigtail bullet connector on trailing coil pack.
That's what I did since I have the Haltech. I guess the rpm can be had somewhere in the wire harness for the ECU but, this will work.
I can get a photo when the sun comes up.
Mike
S-AVCR Purple (RPM)..., Run wire to yellow wired pigtail bullet connector on trailing coil pack.
That's what I did since I have the Haltech. I guess the rpm can be had somewhere in the wire harness for the ECU but, this will work.
I can get a photo when the sun comes up.
Mike
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM