General Rotary Tech Support Use this forum for tech questions not specific to a certain model year

94 FD Trouble with Idle

Thread Tools
 
Search this Thread
 
Old 05-02-09, 08:05 PM
  #1  
Senior Member

Thread Starter
 
mikwon's Avatar
 
Join Date: Jun 2003
Location: NC
Posts: 508
Likes: 0
Received 0 Likes on 0 Posts
94 FD Trouble with Idle

Ok, so I have a rebuild on the engine, history unknown.
A little black smoke on startup, no significant smells. and clears up nice.
Right after startup up it idles fine at 750-850, after she warms up idle gets rough, and falls off, and It idles low, then it dies. can restart fine, but get the same issues once warmed up.
I also have to put the peddle to the floor to start.
Mods on fuel is only on Fuel Pump, I have a supra fuel pump.
Running bolt ons, non sequential turbo, just changed the plugs, fixed nothing.
Any ideas?
Old 05-02-09, 09:13 PM
  #2  
Full Member
 
greengoblin94FD's Avatar
 
Join Date: Nov 2008
Location: PUYALLUP, WA
Posts: 107
Likes: 0
Received 0 Likes on 0 Posts
i had the same problem for awhile, i adjusted the idle screw....then evened it up with the power FC
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Bauer778
3rd Generation Specific (1993-2002)
10
11-04-15 04:42 PM
kuuva86
2nd Generation Specific (1986-1992)
2
09-28-15 05:42 AM
gxl90rx7
Haltech Forum
4
09-14-15 03:09 PM
RotaryBobby
1st Generation Specific (1979-1985)
1
09-10-15 01:33 PM



Quick Reply: 94 FD Trouble with Idle



All times are GMT -5. The time now is 06:59 PM.