93 rx7 stalls on cold startups
93 rx7 stalls on cold startups
Hello guys, i have a little problem with my FD since i put a straight pipe (no o2 sensor) and changed my ecu from JDM to Canadian one.
when i turn on my car in the morning it will stall. this is what happens, i start it up, it revs up to 2000 then drops down to 1500 then stalls, if i give it a LITTLE bit of gaz then it will go back up to 1500 and it will go slowly to 1000 until it is hot.
i've made a video witch explains the problem better than i do.
http://www.youtube.com/watch?v=p3b58...el_video_title
thanks for the help!
when i turn on my car in the morning it will stall. this is what happens, i start it up, it revs up to 2000 then drops down to 1500 then stalls, if i give it a LITTLE bit of gaz then it will go back up to 1500 and it will go slowly to 1000 until it is hot.
i've made a video witch explains the problem better than i do.
http://www.youtube.com/watch?v=p3b58...el_video_title
thanks for the help!
Go to the 3rd gen FAQ thread and read the various threads on idle setting and adjusting the dashpot.
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/faq-3rd-gen-other-useful-links-68640/
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/faq-3rd-gen-other-useful-links-68640/
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
Feb 24, 2019 12:09 PM
ncds_fc
New Member RX-7 Technical
1
Aug 15, 2015 10:06 AM
