General Rotary Tech Support Use this forum for tech questions not specific to a certain model year

90 n/a. rpm break up around 3grand and higher

Thread Tools
 
Search this Thread
 
Old 05-21-08, 07:32 PM
  #1  
Senior Member

Thread Starter
iTrader: (11)
 
jorx7's Avatar
 
Join Date: Mar 2001
Location: NJ
Posts: 676
Likes: 0
Received 1 Like on 1 Post
Question 90 n/a. rpm break up around 3grand and higher

1990 n/a fc. rpm break up at 3grand. the code comes on 20minutes after running. engine codes i got were
01 trailing ignition coil malfunction of spark plug, broken wire, short circuit Trailing side ignitions pulse cut .

08 airflow meter (AFM) broken wire, short circuit basic fuel injection amount and fixed timing .

these are the only 2 codes that matter.
all the reset are emmision and omp cause there all gone. i replaced the trailing coil pack,air mas sensor, air flow meter, injector relay, all these parts work. reset the battery everytime i changed a part. still comes on after 20 mins. before the light comes on the car runs 100%. if i turn the car off while the check engine is on. and turn it back on the code dissapers for 20 mins. im going crazy to figure out this problem. tps is good. any sugestions are helpful. thank john.

it seems like the spark is breaking up. plugs are good and are the wires
Old 06-03-08, 07:54 AM
  #2  
Zoom Zoom Boom

 
GeTCrAzYKiD's Avatar
 
Join Date: Nov 2002
Location: South Florida
Posts: 336
Received 0 Likes on 0 Posts
Is the problem frequent? or just all the time?

I had an 89 GTU that wouldnt go over 3k alot, i swapped my TPS sensor and my ECU just to see if it would do anything and it fixed my problem. But im not sayign go out and change them. If you have a buddy with the same ECU, swap them and see if anythign changes.
Old 06-14-08, 11:22 PM
  #3  
Banned. I got OWNED!!!
 
Peighegyege's Avatar
 
Join Date: Jun 2008
Location: 1
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Unhappy You can marry any one of them

One day a girl brings home her boyfriend and tells her father she wants to marry him. After talking to him for a while, he tells his daughter she can't do it because he's her half brother. The same problem happens again four more times! The girl starts to get pissed off. She goes to her mom and says, "Mom... What have you been doing all your life? Dad's been going around laying every maiden in the town and now I can't marry any of the five guys I like because they have turned out to be my half brothers!!!"Her mom replies, "Don't worry darling, you can marry any one of them you want, he isn't really your dad."----------------------------------Do you look for free wow gold? Welcome to our WoW gold website:1.WoW gold,2.WoW gold,
Old 06-15-08, 08:55 AM
  #4  
H-MusiK
 
Joergen's Avatar
 
Join Date: May 2008
Location: Michigan
Posts: 41
Likes: 0
Received 0 Likes on 0 Posts
http://www.aaroncake.net/RX%2D7/grounding.htm

Maybe?
Old 06-15-08, 01:51 PM
  #5  
Senior Member

iTrader: (2)
 
Stanis's Avatar
 
Join Date: Sep 2006
Location: Ocala, FL
Posts: 431
Likes: 0
Received 1 Like on 1 Post
Originally Posted by jorx7
1990 n/a fc.

these are the only 2 codes that matter.
all the reset are emission and omp cause there all gone.
Your OMP is not hooked up and laying to the side? That is one cause for limp mode. The ECU will not operate correctly if that is missing from the 89-91 models.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
The1Sun
New Member RX-7 Technical
5
09-15-15 04:45 PM
Frox
General Rotary Tech Support
2
09-08-15 08:36 AM



Quick Reply: 90 n/a. rpm break up around 3grand and higher



All times are GMT -5. The time now is 04:05 PM.