General Rotary Tech Support Use this forum for tech questions not specific to a certain model year

6 port idle

Thread Tools
 
Search this Thread
 
Old 02-20-07, 05:03 PM
  #1  
Senior Member

Thread Starter
iTrader: (1)
 
ziig's Avatar
 
Join Date: Apr 2006
Location: ohio
Posts: 625
Likes: 0
Received 1 Like on 1 Post
6 port idle

I just did a street ported 6 port...no emissions all blocked off..but when I started it it back fired real bad..then stopped after a while..it sat outside in the cold now it is backfireing again and wont idle or run for more than a few seconds............anyone have this problem or know what might be up?

I also have a buddy that is doing a 13bt swap and the TPS conection is different any ideas on that?
Old 02-20-07, 06:56 PM
  #2  
B6T
ERTW

iTrader: (2)
 
B6T's Avatar
 
Join Date: Nov 2004
Location: Waterloo, Ontario
Posts: 880
Likes: 0
Received 0 Likes on 0 Posts
Are your plug wires on the correct spark plugs?
Old 02-21-07, 09:33 AM
  #3  
Senior Member

Thread Starter
iTrader: (1)
 
ziig's Avatar
 
Join Date: Apr 2006
Location: ohio
Posts: 625
Likes: 0
Received 1 Like on 1 Post
i think so
I put it on leading and trailing as marked...........is there anything else besides L1L2 T1T2?
Old 02-22-07, 07:02 AM
  #4  
Senior Member

Thread Starter
iTrader: (1)
 
ziig's Avatar
 
Join Date: Apr 2006
Location: ohio
Posts: 625
Likes: 0
Received 1 Like on 1 Post
I started it agian yesterday and it runs..idles real nice ..with a lope street port style..........I noticed that it idles better when I step on the brake pedal so i suspect a leacking booster or something.....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
barkz
Power FC Forum
37
11-21-20 09:34 AM
ZacMan
Build Threads
4
09-19-15 09:20 PM
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM
doritoloco
New Member RX-7 Technical
7
09-05-15 12:41 PM



Quick Reply: 6 port idle



All times are GMT -5. The time now is 11:22 PM.