1st attemptbat rebuild and troubleshooting coolant and fuel system
#1
Rotary Otaku
Thread Starter
1st attemptbat rebuild and troubleshooting coolant and fuel system
I just bought '90 N/A RX7. I plan to do a rebuild after troubleshooting problems I've encountered.
First, my temp gauge does NOT go past normal operating temp (stays in middle). Add Coolant light comes on, then goes away. I noticed the overflow reservoir tank gets full after a day of driving doing errands. I replacedthe thermostat tthat opens at 180 degrees Fahrenheit. The radiator is an unknown aluminium aftermarket with no bleedplug lIKe OEM
First, my temp gauge does NOT go past normal operating temp (stays in middle). Add Coolant light comes on, then goes away. I noticed the overflow reservoir tank gets full after a day of driving doing errands. I replacedthe thermostat tthat opens at 180 degrees Fahrenheit. The radiator is an unknown aluminium aftermarket with no bleedplug lIKe OEM
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM