13B to a KP61 Starlet - Cost?
#1
Junior Member
Thread Starter
Join Date: Oct 2011
Location: Los Angeles, CA/Las Vegas, NV
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
13B to a KP61 Starlet - Cost?
Hello,
Tried looking for info in regards to installing a 13B in an 81 Kp61, but couldn't find any build up threads. Maybe some of you guys can help?
I have a 13B engine and tranny from an SA, I need drive shaft. My questions are, what else would I need, and how much will it all cost me to have it installed and running (estimate)?
Thanks!
Tried looking for info in regards to installing a 13B in an 81 Kp61, but couldn't find any build up threads. Maybe some of you guys can help?
I have a 13B engine and tranny from an SA, I need drive shaft. My questions are, what else would I need, and how much will it all cost me to have it installed and running (estimate)?
Thanks!
#3
87 SE WITH S5 T2 SWAP
iTrader: (11)
Okay so is very easy if you can weld or have somebody do it for you and can be done for almost no money if your engine and trans are in good shape.First the shifter location on the trans has 2 be address.The trans is really long and if you dont mod it the shifter is gonna end up 2 far back.Search for shifter relocation mod on the first gen section 2 figure out the shifter issue.
Second.Mounting the engine is easy.Use a old school 13b front cover and mount the engine the same way that it sits on the rx7.For this you weld in a new crossmember and done.Try 2 put the engine as far as you can and low into the chassis.You have 2 bang the firewall a little 2 clear the slave cylinder.Get a custom driveshaft and the rest is just electronics and some plumbing.
Second.Mounting the engine is easy.Use a old school 13b front cover and mount the engine the same way that it sits on the rx7.For this you weld in a new crossmember and done.Try 2 put the engine as far as you can and low into the chassis.You have 2 bang the firewall a little 2 clear the slave cylinder.Get a custom driveshaft and the rest is just electronics and some plumbing.
#5
Junior Member
Thread Starter
Join Date: Oct 2011
Location: Los Angeles, CA/Las Vegas, NV
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
https://www.rx7club.com/old-school-o...video-1011511/
Shifter mod video.Thanks 2 peejay.
Shifter mod video.Thanks 2 peejay.
Thank you all for the help!
Last edited by dodong27; 11-13-16 at 12:42 PM.
#6
Junior Member
Thread Starter
Join Date: Oct 2011
Location: Los Angeles, CA/Las Vegas, NV
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
This 13B came out of a JDM 78 Savannah RX7 RHD. Gotta check with my Dad if this was the original engine or not, but in any case, I'll be using this engine to put in the Starlet.
Trending Topics
#9
Junior Member
Thread Starter
Join Date: Oct 2011
Location: Los Angeles, CA/Las Vegas, NV
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts