RX7Club.com - Mazda RX7 Forum
I didn't realize the screen was so blurry until looking at it on my phone today.
I didn't realize the screen was so blurry until looking at it on my phone today.
0 2025/09/07 16:07:08
0 2025/09/07 16:07:06
0 2025/07/07 12:35:53
0 2025/07/07 12:35:52
0 2025/07/07 12:32:40
0 2025/07/07 12:32:39
0 2025/07/07 12:32:37
0 2025/07/07 12:10:18
0 2025/07/07 12:10:05
0 2025/07/05 22:29:05
0 2025/07/05 21:15:03
0 2025/07/01 21:52:53
0 2025/06/17 17:33:15
0 2025/06/17 17:33:14
The wire goes into the wrapping. I checked continuity from the terminal to the foil wrap to make sure it's working.
The wire goes into the wrapping. I checked continuity from the terminal to the foil wrap to make sure it's working.
0 2025/05/23 20:56:45
0 2025/05/23 20:56:44
I grounded this with the other ground cable seen in this pic that goes to the chassis.
I grounded this with the other ground cable seen in this pic that goes to the chassis.
0 2025/05/23 20:56:43
I wrapped the sensor wires as well, and grounded them to the same place as the wrap on the other side of the connector.
I wrapped the sensor wires as well, and grounded them to the same place as the wrap on the other side of the connector.
0 2025/05/23 20:56:41
0 2025/05/10 23:43:51
0 2025/05/08 21:35:35
0 2025/05/01 14:31:56
0 2025/04/28 17:36:41
0 2025/04/13 20:33:16
0 2025/04/13 20:25:02
0 2025/04/13 20:24:44
0 2025/02/16 22:10:36
0 2025/02/16 22:08:51
0 2025/02/16 22:08:50
0 2024/05/23 13:27:54
0 2024/05/21 20:27:07
0 2023/12/09 14:02:01
0 2023/11/24 13:21:20
0 2023/11/24 13:18:28
I had a buddy tack the washers together. I was planning on taking them to the waterjet guy but I was impatient and trying to get them done this weekend.
I had a buddy tack the washers together. I was planning on taking them to the waterjet guy but I was impatient and trying to get them done this weekend.
0 2023/11/06 22:41:33
I screwed the box down to the bucket.
I screwed the box down to the bucket.
0 2023/11/06 22:41:29
I routed the excess wiring down under the bucket and secured it. I moved the lights up and down several times to make sure there was no binding or crushing.
I routed the excess wiring down under the bucket and secured it. I moved the lights up and down several times to make sure there was no binding or crushing.
0 2023/11/06 22:41:27
Low beam. It took me a bit to remember how to aim lights. Looks like the right one might need to go further right, but it was lined up
Low beam. It took me a bit to remember how to aim lights. Looks like the right one might need to go further right, but it was lined up
0 2023/11/06 22:41:25
High beam.
High beam.
0 2023/11/06 22:41:21
0 2023/09/22 17:22:53
0 2023/09/22 17:14:29