RX7Club.com - Mazda RX7 Forum
Im pretty happy with how it turned out. Up next is the radio surround
Im pretty happy with how it turned out. Up next is the radio surround
0 2015/11/09 13:30:38
The wastegate that I ordered for the to4b that I have came this weekend, I ordered the wrong size, I thought I needed a 46mm, it turns out that I need a 50mm.does anyone know if they make adapters to change sizes, or will I have to make one
The wastegate that I ordered for the to4b that I have came this weekend, I ordered the wrong size, I thought I needed a 46mm, it turns out that I need a 50mm.does anyone know if they make adapters to change sizes, or will I have to make one
0 2015/11/08 19:08:36
Now I just have to figure out how im going to fabricate a transmission mount. It doesn't look like it's going to be too hard
Now I just have to figure out how im going to fabricate a transmission mount. It doesn't look like it's going to be too hard
0 2015/11/07 17:54:56
0 2015/11/07 17:54:02
And I also got them back in the car
And I also got them back in the car
0 2015/11/07 17:52:38
Herr they are finally bolted together
Herr they are finally bolted together
0 2015/11/07 17:51:03
I picked this up from eBay a couple of days ago, I just picked it up tonight. 85 GSL, with 79 wheels with brand new tires on it, it runs great and came with some new parts
I picked this up from eBay a couple of days ago, I just picked it up tonight. 85 GSL, with 79 wheels with brand new tires on it, it runs great and came with some new parts
0 2015/11/04 19:33:26
I won this on ebay the other day, just picked it up tonight
I won this on ebay the other day, just picked it up tonight
0 2015/11/04 17:55:00
You will know if its the same one that I found on there, because it will have which looks like some kind of adapters, and a wastegate dump tube in the picture
You will know if its the same one that I found on there, because it will have which looks like some kind of adapters, and a wastegate dump tube in the picture
0 2015/11/02 14:46:12
Therenis a ton of room, it just looks like I'll have to make a heat shield in between the turbo and intake manifold
Therenis a ton of room, it just looks like I'll have to make a heat shield in between the turbo and intake manifold
0 2015/11/01 16:10:36
Plenty of room
Plenty of room
0 2015/11/01 16:10:02
This is the to4b that I was telling you about, just sitting on the manifold
This is the to4b that I was telling you about, just sitting on the manifold
0 2015/11/01 16:08:44
After waiting 3 days for the new pilot bearing seal, I was finally able to finish putting the clutch on
After waiting 3 days for the new pilot bearing seal, I was finally able to finish putting the clutch on
0 2015/11/01 14:12:29
It took about 2 hour's to cut and chisel this damn thing out , it was seized in there
It took about 2 hour's to cut and chisel this damn thing out , it was seized in there
0 2015/11/01 14:11:05
I went to put the new clutch on , and noticed that there is nothing left of the pilot bearing, luckily my clutch came with one, but not a new grease seal for it
I went to put the new clutch on , and noticed that there is nothing left of the pilot bearing, luckily my clutch came with one, but not a new grease seal for it
0 2015/11/01 14:08:48
Here's a pic of the driver's side back in, I think it looks pretty good with the springs painted the same color as the car
Here's a pic of the driver's side back in, I think it looks pretty good with the springs painted the same color as the car
0 2015/11/01 14:06:44
0 2015/10/23 14:26:47
I made a couple copies of my racing beat heat shield
I made a couple copies of my racing beat heat shield
0 2015/10/22 10:08:24
Here it is with the new sway bar links installed
Here it is with the new sway bar links installed
0 2015/10/18 12:40:25
Here is a picture of the freshly painted suspension back in
Here is a picture of the freshly painted suspension back in
0 2015/10/18 12:36:39
Another picture with the suspension back in , new swqy bar links installed
Another picture with the suspension back in , new swqy bar links installed
0 2015/10/18 10:35:28
Here it is with the painted suspension back in
Here it is with the painted suspension back in
0 2015/10/18 10:34:19
Here is a picture of the rail and apron.I repainted the driver's side with the rest og what I painted, it just made it easier.now hopefully the fresh paint will hold up for 30 some years like the factory paint.
Here is a picture of the rail and apron.I repainted the driver's side with the rest og what I painted, it just made it easier.now hopefully the fresh paint will hold up for 30 some years like the factory paint.
0 2015/10/17 04:37:54
0 2015/10/17 04:36:56
Here it is with the last coat of clear on it , I got a few dirt nibs in it, nothing that won't wet sand and buff out.
Here it is with the last coat of clear on it , I got a few dirt nibs in it, nothing that won't wet sand and buff out.
0 2015/10/17 04:34:11
Here it is all taped up and scuffed.
Here it is all taped up and scuffed.
0 2015/10/17 04:32:59
I used my cheap harbor freight gun.I got it to spray the por 15 paint, because I don't want to spray that through my good spray gun. Believe it or not, it actually sprays really well
I used my cheap harbor freight gun.I got it to spray the por 15 paint, because I don't want to spray that through my good spray gun. Believe it or not, it actually sprays really well
0 2015/10/17 04:28:53
And this , im dying to try out.carbon fiber hydrographic kit. I want to carbon fiber dip some interior pieces
And this , im dying to try out.carbon fiber hydrographic kit. I want to carbon fiber dip some interior pieces
0 2015/10/14 09:36:01
Rtek 2.1 that I picked up from Facebook. Now I have 1.7,1.8, and 2.1. Im starting to feel like a hoarder.
Rtek 2.1 that I picked up from Facebook. Now I have 1.7,1.8, and 2.1. Im starting to feel like a hoarder.
0 2015/10/14 09:33:54
Front and rear energy suspension sway bar links
Front and rear energy suspension sway bar links
0 2015/10/14 09:32:51
Here is the subframe and control arms with a fresh coat of semi gloss black paint
Here is the subframe and control arms with a fresh coat of semi gloss black paint
0 2015/10/11 18:41:34
I also finished blending in and clearing the driver's side apron, the camera on my phone doesn't seem to take good enough pictures to tell how shiny it is.tomorrow I'll clean and buff the rest of the apron to clean the blend up
I also finished blending in and clearing the driver's side apron, the camera on my phone doesn't seem to take good enough pictures to tell how shiny it is.tomorrow I'll clean and buff the rest of the apron to clean the blend up
0 2015/10/10 16:04:15
Here is the sway bar with a fresh coat of semi gloss black paint
Here is the sway bar with a fresh coat of semi gloss black paint
0 2015/10/10 16:02:45
I only did one coat on the rad support, because I might have to cut and move the lower brace to install the vmount. After I get that all pre fit I will finish cutting it in and clear it
I only did one coat on the rad support, because I might have to cut and move the lower brace to install the vmount. After I get that all pre fit I will finish cutting it in and clear it
0 2015/10/04 16:00:54
I also finished the bodywork and cut in the driver's side apron and rad support
I also finished the bodywork and cut in the driver's side apron and rad support
0 2015/10/04 15:59:23
I also realized that I have been jumping around to much and finally finished my rust repair.
I also realized that I have been jumping around to much and finally finished my rust repair.
0 2015/10/04 15:57:29
I tried it out, but it stuck up a little too much on the one side to where I couldn't get a wrench on it, so I grinded the one side down. And it worked like a champ.
I tried it out, but it stuck up a little too much on the one side to where I couldn't get a wrench on it, so I grinded the one side down. And it worked like a champ.
0 2015/10/04 15:54:50
I cut a Harbour freight 22mm socket down so it is the same height as the nut, and Welded it to a Piece of flat steel bar.
I cut a Harbour freight 22mm socket down so it is the same height as the nut, and Welded it to a Piece of flat steel bar.
0 2015/10/04 15:52:05
Here it is with etch primer. Tomorrow night after work, im going to cut in that section with paint.
Here it is with etch primer. Tomorrow night after work, im going to cut in that section with paint.
0 2015/09/27 16:21:51
Here is the putty coat all sanded and wiped down with wax and grease remover
Here is the putty coat all sanded and wiped down with wax and grease remover
0 2015/09/27 16:20:20