RX7Club.com - Mazda RX7 Forum
She's getting there Epsilon Center Lock wheels
She's getting there Epsilon Center Lock wheels
0 2015/07/18 17:10:30
She's getting there Epsilon Center Lock wheels
She's getting there Epsilon Center Lock wheels
0 2015/07/18 17:10:13
Rear shot of the car with the Epsilon Center Lock wheels installed...mmmph...
Rear shot of the car with the Epsilon Center Lock wheels installed...mmmph...
0 2015/07/18 17:09:36
Rear shot of the car with the Epsilon Center Lock wheels installed...mmmph...
Rear shot of the car with the Epsilon Center Lock wheels installed...mmmph...
0 2015/07/18 17:09:14
Passenger's axle in.
Passenger's axle in.
0 2015/07/18 17:08:50
I'll just roll it further out on the jack!
I'll just roll it further out on the jack!
0 2015/07/18 17:08:31
Uh oh...axles won't fit in this length of space....
Uh oh...axles won't fit in this length of space....
0 2015/07/18 17:08:13
Uh oh...axles won't fit in this length of space....
Uh oh...axles won't fit in this length of space....
0 2015/07/18 17:07:56
Rear axle carrier and differential are hung!
Rear axle carrier and differential are hung!
0 2015/07/18 17:07:31
Outer piece finally welded onto the car.
Outer piece finally welded onto the car.
0 2015/07/18 17:07:11
Outer piece finally welded onto the car.
Outer piece finally welded onto the car.
0 2015/07/18 17:07:00
0 2015/07/18 17:06:37
I also got a usable center iron as well with very little runout, so both of these parts are a huge help.
I also got a usable center iron as well with very little runout, so both of these parts are a huge help.
0 2015/07/18 17:00:50
Replacement rotor housing is in as good of, if not better shape, than my good housing!
Replacement rotor housing is in as good of, if not better shape, than my good housing!
0 2015/07/18 17:00:27
The parts that I used for the new hard brake lines.
The parts that I used for the new hard brake lines.
0 2015/07/18 17:00:06
Coil at the end of the hard brake line to take up some length
Coil at the end of the hard brake line to take up some length
0 2015/07/18 16:59:53
Hard line running underneath the protector where it originally did
Hard line running underneath the protector where it originally did
0 2015/07/18 16:59:31
Stock line splitter, obviously needs to be sand blasted
Stock line splitter, obviously needs to be sand blasted
0 2015/07/18 16:59:10
Outer hard brake line routing
Outer hard brake line routing
0 2015/07/18 16:58:45
Outer hard brake line routing
Outer hard brake line routing
0 2015/07/18 16:58:22
New tools to help with welding and grinding! Loving it so far, one of the best tool purchases I've made in a while.
New tools to help with welding and grinding! Loving it so far, one of the best tool purchases I've made in a while.
0 2015/07/18 16:58:00
New sheet metal piece I made by hand for the outer layer
New sheet metal piece I made by hand for the outer layer
0 2015/07/18 16:57:39
First patch welded in for the storage bin on the driver's side
First patch welded in for the storage bin on the driver's side
0 2015/07/18 16:57:27
First patch welded in for the storage bin on the driver's side
First patch welded in for the storage bin on the driver's side
0 2015/07/18 16:57:16
Prepping everything to be pressed on.
Prepping everything to be pressed on.
0 2015/07/08 17:53:29
A random piece of metal that I found in the neighbor's garage that worked perfectly for pressing the bearing collars on since the v-block wouldn't work safely.
A random piece of metal that I found in the neighbor's garage that worked perfectly for pressing the bearing collars on since the v-block wouldn't work safely.
0 2015/07/08 17:50:56
A random piece of metal that I found in the neighbor's garage that worked perfectly for pressing the bearing collars on since the v-block wouldn't work safely.
A random piece of metal that I found in the neighbor's garage that worked perfectly for pressing the bearing collars on since the v-block wouldn't work safely.
0 2015/07/08 17:49:32
Pressed on the wheel bearings and collars finally, in the correct order!
Pressed on the wheel bearings and collars finally, in the correct order!
0 2015/07/08 17:48:45
Old rear wheel seal after being removed, versus the new one.
Old rear wheel seal after being removed, versus the new one.
0 2015/07/08 17:47:40
New rear wheel seals installed.
New rear wheel seals installed.
0 2015/07/08 17:46:10
Finally got the gold bell housing on the transmission - looks great!
Finally got the gold bell housing on the transmission - looks great!
0 2015/07/08 17:44:36
Finally got the gold bell housing on the transmission - looks great!
Finally got the gold bell housing on the transmission - looks great!
0 2015/07/08 17:43:18
Painting the rear differential cover to match the freshly painted rear axle carrier.
Painting the rear differential cover to match the freshly painted rear axle carrier.
0 2015/07/08 17:41:59
Started in on the driver's side bin rust, finally.
Started in on the driver's side bin rust, finally.
0 2015/07/05 18:11:09
Initial holes drilled out of the metal.
Initial holes drilled out of the metal.
0 2015/07/05 18:10:47
Rough cut of the metal.
Rough cut of the metal.
0 2015/07/05 18:10:26
I finished up the fuel level sending unit. I had to JB Weld the outside ring of the unit because I drilled and tapped those M6 bolts through the tank itself.
I finished up the fuel level sending unit. I had to JB Weld the outside ring of the unit because I drilled and tapped those M6 bolts through the tank itself.
0 2015/07/05 18:09:42
Fuel sending unit installed.
Fuel sending unit installed.
0 2015/07/05 18:09:16
Perfectly good bearing had to be cut off, I forgot to install the wheel bearing retainer and brake disc dust cover (like an idiot). Ah well, I got to paint them up nice now anyways.
Perfectly good bearing had to be cut off, I forgot to install the wheel bearing retainer and brake disc dust cover (like an idiot). Ah well, I got to paint them up nice now anyways.
0 2015/07/05 18:08:51
Cleaned up the dust covers and wheel bearing/axle retainers in order to paint.
Cleaned up the dust covers and wheel bearing/axle retainers in order to paint.
0 2015/07/05 18:08:27