RX7Club.com - Mazda RX7 Forum
going back together
going back together
0 2011/12/22 16:04:04
going back together
going back together
0 2011/12/22 16:04:04
going back together
going back together
0 2011/12/22 16:04:04
Dirty engine case
Dirty engine case
0 2011/12/21 07:26:04
Dirty engine case to be bead blasted with 30-60 bead
Dirty engine case to be bead blasted with 30-60 bead
0 2011/12/21 07:26:04
Rusty old scored cylinder from lack of cooling around exhaust port ( the cylinder fins were full of dirt all the way around the exhaust port ..
Rusty old scored cylinder from lack of cooling around exhaust port ( the cylinder fins were full of dirt all the way around the exhaust port ..
0 2011/12/21 07:22:25
Bike pieces
Bike pieces
0 2011/12/21 07:22:25
Bike pieces
Bike pieces
2 2011/12/21 07:22:25
fender with a ton of B.C. rust
fender with a ton of B.C. rust
0 2011/12/21 07:19:29
Fuel tank will be totally bead blasted
Fuel tank will be totally bead blasted
0 2011/12/21 07:19:29
1979 Honda hobbit pa 50 11
1979 Honda hobbit pa 50 11
0 2011/12/21 07:19:29
my daily driver
my daily driver
3 2011/12/02 21:37:36
monkey
monkey
0 2011/11/30 20:19:21
Snapshot 6 (10 07 2011 9 25 PM)
Snapshot 6 (10 07 2011 9 25 PM)
4 2011/07/10 20:33:07
Snapshot 5 (10 07 2011 9 24 PM)
Snapshot 5 (10 07 2011 9 24 PM)
0 2011/07/10 20:33:07
Snapshot 4 (10 07 2011 9 24 PM)
Snapshot 4 (10 07 2011 9 24 PM)
0 2011/07/10 20:33:07
2 snap shot
2 snap shot
2 2011/07/10 20:31:44
Snapshot 3 drag bike
Snapshot 3 drag bike
0 2011/07/10 20:31:44
Snapshot 1 drag bike
Snapshot 1 drag bike
0 2011/07/10 20:31:44
reminds me of being on the farm our barn had windows just like that ..
reminds me of being on the farm our barn had windows just like that ..
1 2010/12/23 00:12:34
Room temperature ?? blaaa, needs to be by the window
Room temperature ?? blaaa, needs to be by the window
0 2010/12/22 18:05:32
men4 No time for Santa to stop
men4 No time for Santa to stop
1 2010/12/22 18:05:32
men6 OH yea I can see much better now
men6 OH yea I can see much better now
1 2010/12/22 18:02:17
men1
men1
1 2010/12/22 18:02:17
IMG 0543 1 1
IMG 0543 1 1
0 2011/01/02 13:46:37
IMG 0546 1 1
IMG 0546 1 1
0 2011/01/02 13:44:51
IMG 0542 1
IMG 0542 1
0 2011/01/02 13:44:51
B M electronics on Faithful ave. in Saskatoon have the best selection of electrical connectors . that I have found .. Just fit a piece of hose over the female plug wrapped it with shrink tape till it fit tight in the stock connector hole put the cover on snapped it in place after two days the plug stayed tight in the hole without the cap ..
B M electronics on Faithful ave. in Saskatoon have the best selection of electrical connectors . that I have found .. Just fit a piece of hose over the female plug wrapped it with shrink tape till it fit tight in the stock connector hole put the cover on snapped it in place after two days the plug stayed tight in the hole without the cap ..
0 2011/01/02 09:19:40
Didn't want an ugly old cap so I made a piece to cover the rotor shaft , Just made it to fit tight in the cover hole and manipulated the dist cap clips to pop into place on top of the cover
Didn't want an ugly old cap so I made a piece to cover the rotor shaft , Just made it to fit tight in the cover hole and manipulated the dist cap clips to pop into place on top of the cover
0 2011/01/02 09:19:40
Before 2
Before 2
0 2010/12/08 11:24:58
Before 1
Before 1
1 2010/12/08 11:24:58
g2
g2
0 2010/12/08 11:09:51
g4
g4
0 2010/12/08 11:09:51
g8
g8
0 2010/12/07 14:21:21
g3
g3
0 2010/12/07 14:21:21
100 0009 IMG
100 0009 IMG
2 2010/12/07 14:21:21
g11
g11
0 2010/12/07 00:28:47
g10
g10
1 2010/12/07 00:28:47
g7
g7
0 2010/12/07 00:27:42
g1
g1
0 2010/12/07 00:27:42