RX7Club.com - Mazda RX7 Forum
Painted the fan to help motivate me and make me feel like I'm getting shit done.
Painted the fan to help motivate me and make me feel like I'm getting shit done.
0 2013/03/11 00:59:07
My friend dropped by and gave me this bucket seat for helping him out earlier with his FC. Very kind of him. I was able to put this in using a combination of side mounts I had used with my previous one and directly bolt to stock sliders and this actually sits slightly lower then stock seats, which already have a very nice seating position in my opinion.
My friend dropped by and gave me this bucket seat for helping him out earlier with his FC. Very kind of him. I was able to put this in using a combination of side mounts I had used with my previous one and directly bolt to stock sliders and this actually sits slightly lower then stock seats, which already have a very nice seating position in my opinion.
0 2013/03/11 00:53:26
My friend is helping out solder the engine harness while I do other work with the vacuum lines and fuel system. You can really see the charring from the fire on the bulk head and the wheel wells.
My friend is helping out solder the engine harness while I do other work with the vacuum lines and fuel system. You can really see the charring from the fire on the bulk head and the wheel wells.
0 2013/03/11 00:53:26
Getting close to finishing, making use of the down time to sandblast then paint pulleys and other stuff. Really making things pop out now.
Getting close to finishing, making use of the down time to sandblast then paint pulleys and other stuff. Really making things pop out now.
0 2013/03/11 00:53:26
Intake side, almost done, just gotta finish wiring up the burned charging harness too
Intake side, almost done, just gotta finish wiring up the burned charging harness too
0 2013/03/11 00:48:40
FINISHED! Took about 4 days to do. very pleased witht eh results. Still need to clean up more of the soot and what not that remains on the paint but most of it in the wheel wells has been cleaned.
FINISHED! Took about 4 days to do. very pleased witht eh results. Still need to clean up more of the soot and what not that remains on the paint but most of it in the wheel wells has been cleaned.
0 2013/03/11 00:48:40
First turn of the key and she roared back to life as if nothing happened! Actually runs much better and even smoother then ever. Probably because vacuum leaks are a thing of the past now.
First turn of the key and she roared back to life as if nothing happened! Actually runs much better and even smoother then ever. Probably because vacuum leaks are a thing of the past now.
0 2013/03/11 00:48:40
Taking a break from pulling parts from the parts car.
Taking a break from pulling parts from the parts car.
0 2013/02/25 07:02:21
Noticed the Waste gate down there. Wonder if anyone can tell me of a wicked Waste gate that will make AWESOME sounds lol. Might as well if its turbo, right?
Noticed the Waste gate down there. Wonder if anyone can tell me of a wicked Waste gate that will make AWESOME sounds lol. Might as well if its turbo, right?
0 2011/09/28 00:24:20
New sparkplugs and wires. Gonna tackle the carb some time soon.
New sparkplugs and wires. Gonna tackle the carb some time soon.
0 2011/09/28 00:24:20
Pretty clean some paint fade and light rust but none on frame.
Pretty clean some paint fade and light rust but none on frame.
0 2011/09/24 23:53:06
IMG 0866
IMG 0866
0 2011/09/24 23:53:06
All primer'd up and ready for paint. It was a real pain sanding down to the primer for the whole hood and into the cracks to fix all that up.
All primer'd up and ready for paint. It was a real pain sanding down to the primer for the whole hood and into the cracks to fix all that up.
0 2011/08/17 21:30:29
Painted the hood and filled the cracks myself, not bad of a job for a 19 year old and 20 bucks dont ya think?
Painted the hood and filled the cracks myself, not bad of a job for a 19 year old and 20 bucks dont ya think?
0 2011/08/17 21:30:29
Ive been able to fix and upgrade ALOT, partially dude to the fact that I got a part time job and Ive graduated HS! So to list a few things, New airfilter with 90degree bend, new thermostat, new water pump, S5 overflow tank conversion, aluminum airdam(black thing), new tires, and a whole bunch of other interior things like a momo replica steering wheel. Also cleaned up alot of the wires that were loosely hanging around. P.S. I noticed I could use a shorter alternator belt and very easily clear the tower bar so I put on a 29in? belt instead of a 31 like the manual says to.
Ive been able to fix and upgrade ALOT, partially dude to the fact that I got a part time job and Ive graduated HS! So to list a few things, New airfilter with 90degree bend, new thermostat, new water pump, S5 overflow tank conversion, aluminum airdam(black thing), new tires, and a whole bunch of other interior things like a momo replica steering wheel. Also cleaned up alot of the wires that were loosely hanging around. P.S. I noticed I could use a shorter alternator belt and very easily clear the tower bar so I put on a 29in? belt instead of a 31 like the manual says to.
0 2010/09/28 19:12:07
The rear bumper had very large and deep cracks into a weird layer of filler? on top of the fiberglass. So I couldn't get rid of those. But I did restore horribly faded and cracked black plastic surround so it actually looks black.
The rear bumper had very large and deep cracks into a weird layer of filler? on top of the fiberglass. So I couldn't get rid of those. But I did restore horribly faded and cracked black plastic surround so it actually looks black.
0 2010/04/26 13:33:20
These 7 in wide wheels helped fill the gap alot compared to those damned 5.5in wheels!!! so far looks like I have no rubbing problems what so ever too!
These 7 in wide wheels helped fill the gap alot compared to those damned 5.5in wheels!!! so far looks like I have no rubbing problems what so ever too!
0 2010/03/02 08:10:56
Cleaned interior panels / carpeting realigned.
Cleaned interior panels / carpeting realigned.
0 2010/01/04 08:15:24
After fixing and cleaning. I still need to restore the paint, its fadded and has almost zero clear coat on it! only the hood is shiny!
After fixing and cleaning. I still need to restore the paint, its fadded and has almost zero clear coat on it! only the hood is shiny!
0 2009/12/27 13:10:04