RX7Club.com - Mazda RX7 Forum
From an RX-7 club meet in SF at Treasure Island. Looks pretty nice with just the Rmagic Wide body.
From an RX-7 club meet in SF at Treasure Island. Looks pretty nice with just the Rmagic Wide body.
0 2013/12/09 16:28:53
And so the dream reaches the half point!
And so the dream reaches the half point!
0 2013/12/09 16:23:37
Got me some mad Lexus projectors for 60 bucks!
Got me some mad Lexus projectors for 60 bucks!
0 2013/12/09 16:23:37
Just lovingly shaving the bumper to fit the projectors deep enough and level.
Just lovingly shaving the bumper to fit the projectors deep enough and level.
0 2013/12/09 16:16:44
The built in level is visible from behind.
The built in level is visible from behind.
0 2013/12/09 16:16:44
The cut outs for the head lights were very straight forward. Just cut some slots with a dremel while eyeballing and cutting in steps.
The cut outs for the head lights were very straight forward. Just cut some slots with a dremel while eyeballing and cutting in steps.
0 2013/12/09 16:16:44
Finally got the headlights to where I like em.
Finally got the headlights to where I like em.
0 2013/12/09 16:11:26
Shaving the bumper for better fit.
Shaving the bumper for better fit.
0 2013/12/09 16:11:26
AND BAM! The front end of my dreams is fitted
AND BAM! The front end of my dreams is fitted
0 2013/12/09 16:11:26
This hole is being added to make room for the projector.
This hole is being added to make room for the projector.
0 2013/12/09 16:01:51
Double checking the hole position.
Double checking the hole position.
0 2013/12/09 16:01:51
This is the only cutting of the headlight area that needed to be done in order to fit the lights. Retained all other bolt holes and mounts. Added an arch at the top to get the headlight level
This is the only cutting of the headlight area that needed to be done in order to fit the lights. Retained all other bolt holes and mounts. Added an arch at the top to get the headlight level
0 2013/12/09 16:01:51
Final test fit.
Final test fit.
0 2013/12/09 15:48:16
not too much had to be cut in order to fit the lights.
not too much had to be cut in order to fit the lights.
0 2013/12/09 15:48:16
Very simple wiring to the stock connector.
Very simple wiring to the stock connector.
0 2013/12/09 15:48:16
Simple strip of aluminum and three bolts nuts were used to mount the headlights which retained OE adjusters from the Lexus making the simple mount possible.
Simple strip of aluminum and three bolts nuts were used to mount the headlights which retained OE adjusters from the Lexus making the simple mount possible.
0 2013/12/09 15:42:09
Wired up! This was wired directly to the normal harness with spade connectors so reverting to flipping headlights is a snap.
Wired up! This was wired directly to the normal harness with spade connectors so reverting to flipping headlights is a snap.
0 2013/12/09 15:38:39
My friend who's garage I was borrowing was having some fun too!
My friend who's garage I was borrowing was having some fun too!
0 2013/12/09 15:38:39
Needed this after my skin soaked up all the fiberglass. Used nothing but simple goggles and a small mouth mask.
Needed this after my skin soaked up all the fiberglass. Used nothing but simple goggles and a small mouth mask.
0 2013/12/09 15:32:47
A DVD was used as a stencil on the Aluminum flashing for the headlights.
A DVD was used as a stencil on the Aluminum flashing for the headlights.
0 2013/12/09 15:32:47
Simple aluminum flashing was placed under the lenses to prevent the refracted sunlight from burning the bumper like a magnifying lens. Plus it looks cool. XD
Simple aluminum flashing was placed under the lenses to prevent the refracted sunlight from burning the bumper like a magnifying lens. Plus it looks cool. XD
0 2013/12/09 15:25:57
Last step! Cut out the Lexan using a box cutterand applied weather stripping between the Lexan and bumper for the rain.
Last step! Cut out the Lexan using a box cutterand applied weather stripping between the Lexan and bumper for the rain.
0 2013/12/09 15:25:57
FC2000 headlight conversion is successful! for now it runs halogen bulbs in the projectors which are still much nicer then sealedbeam.
FC2000 headlight conversion is successful! for now it runs halogen bulbs in the projectors which are still much nicer then sealedbeam.
0 2013/12/09 15:25:57
End result! Just in time for an Autocross at Mazda Laguna Seca! Beat a Lotus and got to show off my custom Rotary Wing mounts!
End result! Just in time for an Autocross at Mazda Laguna Seca! Beat a Lotus and got to show off my custom Rotary Wing mounts!
1 2013/12/09 14:57:11
Chillin at the Initial D Cars and Tofu meet.
Chillin at the Initial D Cars and Tofu meet.
0 2015/04/29 23:40:18
Movin spots~
Movin spots~
0 2015/04/29 23:40:18
Chillin at the Initial D Cars and Tofu meet.
Chillin at the Initial D Cars and Tofu meet.
0 2015/04/29 23:40:18
Breakin necks and poppin ear drums! >~<
Breakin necks and poppin ear drums! >~<
0 2015/04/29 23:21:31
Watchoo noe bout Max JDM?!
Watchoo noe bout Max JDM?!
0 2015/04/29 23:21:31
I need more decals and sponsors....
I need more decals and sponsors....
0 2015/04/29 23:21:31
Noticed the Waste gate down there. Wonder if anyone can tell me of a wicked Waste gate that will make AWESOME sounds lol. Might as well if its turbo, right?
Noticed the Waste gate down there. Wonder if anyone can tell me of a wicked Waste gate that will make AWESOME sounds lol. Might as well if its turbo, right?
0 2011/09/28 00:24:20
New sparkplugs and wires. Gonna tackle the carb some time soon.
New sparkplugs and wires. Gonna tackle the carb some time soon.
0 2011/09/28 00:24:20
IMG 0851
IMG 0851
1 2011/09/25 00:49:55
The supposedly "rare" Arkay turbo kit that is supposed to push anywhere between 300 and 200hp... i dunno, its hard to believe in those numbers but thats what I hear/find on forums about his kit... still neat to have!
The supposedly "rare" Arkay turbo kit that is supposed to push anywhere between 300 and 200hp... i dunno, its hard to believe in those numbers but thats what I hear/find on forums about his kit... still neat to have!
1 2011/09/25 00:49:55
Notice the License plate.
Notice the License plate.
2 2011/09/24 23:53:06
Pretty clean some paint fade and light rust but none on frame.
Pretty clean some paint fade and light rust but none on frame.
0 2011/09/24 23:53:06
IMG 0866
IMG 0866
0 2011/09/24 23:53:06
My new front end.
My new front end.
0 2013/12/09 17:46:40
Damn! My car has come along way!
Damn! My car has come along way!
0 2013/03/11 01:25:24
All primer'd up and ready for paint. It was a real pain sanding down to the primer for the whole hood and into the cracks to fix all that up.
All primer'd up and ready for paint. It was a real pain sanding down to the primer for the whole hood and into the cracks to fix all that up.
0 2011/08/17 21:30:29