RX7Club.com - Mazda RX7 Forum
I can see there is no way of removing the bracket without getting rid of the rivet head.
I can see there is no way of removing the bracket without getting rid of the rivet head.
0 2024/12/24 18:20:06
Drilled out the rivet head with a ½” bit just enough to pop it out.
Drilled out the rivet head with a ½” bit just enough to pop it out.
0 2024/12/24 18:20:08
Used a Sharpie and cut off wheel to cut down the thread bolt so it fits back on the car. (almost looks like JP3’s bracket)
Used a Sharpie and cut off wheel to cut down the thread bolt so it fits back on the car. (almost looks like JP3’s bracket)
0 2024/12/24 18:20:09
The other ball easily screws into the hatch! Threads match! Wow that’s the first
The other ball easily screws into the hatch! Threads match! Wow that’s the first
0 2024/12/24 18:20:10
Other bracket screws back into place on the car.
Other bracket screws back into place on the car.
0 2024/12/24 18:20:11
snap gas struts in place and done! Easy!
snap gas struts in place and done! Easy!
0 2024/12/24 18:20:12
From a previous post on this thread I used hot glue to attach a magnet to put the cover back on (not necessarily)
From a previous post on this thread I used hot glue to attach a magnet to put the cover back on (not necessarily)
0 2024/12/24 18:20:13
0 2025/07/13 09:32:04
0 2025/07/13 09:35:28
0 2025/07/13 09:35:35
0 2025/07/13 09:37:38
0 2025/07/13 09:37:46
0 2025/07/13 09:43:02
0 2025/07/13 09:43:03
0 2025/07/15 20:55:00
0 2025/07/15 20:55:01
0 2025/07/15 20:55:02
0 2025/07/15 20:55:03
0 2025/07/15 20:55:04
0 2025/07/15 20:58:38
0 2025/07/21 21:07:28
0 2025/07/21 21:07:23
0 2025/07/21 21:07:24
0 2025/07/21 21:07:25
0 2025/07/21 21:07:26
0 2025/07/21 21:07:26
0 2025/07/21 21:07:27
0 2025/07/21 21:11:47
0 2025/07/21 21:11:48
0 2025/07/21 21:11:48
0 2025/07/21 21:11:50
0 2025/07/21 21:11:49
0 2025/07/27 22:55:51
0 2025/07/27 23:00:33
0 2025/07/27 23:01:37
0 2025/07/27 23:03:06
0 2025/07/27 23:05:34
0 2025/07/27 23:06:24
0 2025/07/27 23:07:58
0 2025/07/27 23:09:14