RX7Club.com - Mazda RX7 Forum
0 2020/12/24 16:28:36
0 2020/12/24 16:28:37
0 2020/12/24 16:28:38
0 2020/12/24 16:28:40
0 2020/12/24 16:28:41
0 2020/12/24 16:28:43
0 2020/12/24 16:28:44
0 2020/12/24 16:28:45
0 2020/12/24 16:28:47
0 2020/12/24 16:28:48
0 2020/12/24 16:28:49
0 2023/03/12 15:25:14
0 2023/03/12 15:25:16
0 2023/03/12 15:25:18
0 2023/03/12 15:25:20
0 2023/03/12 15:25:22
0 2023/03/12 15:25:23
0 2023/03/12 15:25:25
0 2023/03/12 15:25:27
0 2023/03/12 15:25:29
0 2023/03/12 15:25:30
0 2023/03/12 15:25:32
0 2023/03/12 15:25:34
0 2023/03/12 15:25:35
0 2023/03/12 15:25:37
0 2023/03/12 15:25:39
0 2023/03/12 15:25:41
0 2023/03/12 15:25:42
You can see that the nut has plenty of clearance with the chassis, you just need to cut down the threads. (might I suggest using Loctite)
You can see that the nut has plenty of clearance with the chassis, you just need to cut down the threads. (might I suggest using Loctite)
0 2024/12/24 18:20:14
What I received from amazon.
What I received from amazon.
0 2024/12/24 18:12:05
Taking apart the interior to get to the gas strut Hatch brackets I decided to unbolt everything and use a box wrench to break loose the ball on the hatch no need to pry it off the gas strut since it will be replaced.
Taking apart the interior to get to the gas strut Hatch brackets I decided to unbolt everything and use a box wrench to break loose the ball on the hatch no need to pry it off the gas strut since it will be replaced.
0 2024/12/24 18:12:29
Close up view of the gas strut bottom brackets after removal
Close up view of the gas strut bottom brackets after removal
0 2024/12/24 18:12:31
I can see there is no way of removing the bracket without getting rid of the rivet head.
I can see there is no way of removing the bracket without getting rid of the rivet head.
0 2024/12/24 18:12:32
Drilled out the rivet head with a ½” bit just enough to pop it out.
Drilled out the rivet head with a ½” bit just enough to pop it out.
0 2024/12/24 18:12:34
Used a Sharpie and cut off wheel to cut down the thread bolt so it fits back on the car. (almost looks like JP3’s bracket)
Used a Sharpie and cut off wheel to cut down the thread bolt so it fits back on the car. (almost looks like JP3’s bracket)
0 2024/12/24 18:12:35
What I received from amazon.
What I received from amazon.
0 2024/12/24 18:14:24
What I received from amazon.
What I received from amazon.
0 2024/12/24 18:17:19
Taking apart the interior to get to the gas strut Hatch brackets I decided to unbolt everything and use a box wrench to break loose the ball on the hatch no need to pry it off the gas strut since it will be replaced.
Taking apart the interior to get to the gas strut Hatch brackets I decided to unbolt everything and use a box wrench to break loose the ball on the hatch no need to pry it off the gas strut since it will be replaced.
0 2024/12/24 18:17:41
Taking apart the interior to get to the gas strut Hatch brackets I decided to unbolt everything and use a box wrench to break loose the ball on the hatch no need to pry it off the gas strut since it will be replaced.
Taking apart the interior to get to the gas strut Hatch brackets I decided to unbolt everything and use a box wrench to break loose the ball on the hatch no need to pry it off the gas strut since it will be replaced.
0 2024/12/24 18:19:23
Close up view of the gas strut bottom brackets after removal
Close up view of the gas strut bottom brackets after removal
0 2024/12/24 18:19:40