RX7Club.com - Mazda RX7 Forum
0 2018/11/25 00:27:50
0 2018/11/25 00:27:50
0 2019/05/02 18:03:59
0 2018/11/25 00:27:51
Old set up was 14 inch rotor with 4 piston monoblock brembo race caliper.
Old set up was 14 inch rotor with 4 piston monoblock brembo race caliper.
0 2019/05/02 18:04:12
0 2019/05/02 18:04:26
0 2018/11/25 00:29:30
0 2018/11/25 00:29:32
Sealing rear of rotor forces air through the vanes. 5 inch duct attaches to this.
Sealing rear of rotor forces air through the vanes. 5 inch duct attaches to this.
0 2019/05/02 18:10:57
Old vs new
Old vs new
0 2019/05/02 18:11:07
Cut off the stock shaft and adapted the rx7 clevise with a chunk of aluminium .
Cut off the stock shaft and adapted the rx7 clevise with a chunk of aluminium .
0 2019/05/02 18:11:15
The tricky part was this wheel spacer . The inner part centres to the rx7 hub. The outer ring centers the Porsche rotor which has a large center hole. The other side of this spacer has a raised center to center the wheel . 3.25 inch long arp wheel studs were required as well.
The tricky part was this wheel spacer . The inner part centres to the rx7 hub. The outer ring centers the Porsche rotor which has a large center hole. The other side of this spacer has a raised center to center the wheel . 3.25 inch long arp wheel studs were required as well.
0 2019/05/02 18:11:22
Rear caliper was straightforward.
Rear caliper was straightforward.
0 2019/05/02 18:11:32
0 2019/05/02 18:11:39
0 2019/05/02 18:11:46
Old vs new
Old vs new
0 2019/05/02 18:21:56
Cut off Porsche shaft and adapted rx7 Clovis with aluminium block.
Cut off Porsche shaft and adapted rx7 Clovis with aluminium block.
0 2019/05/02 18:22:09
Sealed rear of front rotor and will use 5 inch ducts
Sealed rear of front rotor and will use 5 inch ducts
0 2019/05/02 18:22:19
Custom front spacer centres from inside to rx7 hub. Outer ring centers rotor. Other side centers wheel. Use a 3.25 arp stud !
Custom front spacer centres from inside to rx7 hub. Outer ring centers rotor. Other side centers wheel. Use a 3.25 arp stud !
0 2019/05/02 18:22:31
Done. We will lighten the adapter when we have more time .
Done. We will lighten the adapter when we have more time .
0 2019/05/02 18:22:44
We may adapt the Porsche rotor at a later date if needed.
We may adapt the Porsche rotor at a later date if needed.
0 2019/05/02 18:27:12
The rear was straightforward .
The rear was straightforward .
0 2019/05/02 18:27:26
0 2020/07/06 20:44:05
0 2020/07/06 20:44:14
0 2020/07/06 20:44:24
0 2020/07/31 21:25:09
0 2020/07/31 21:25:38
Front rotors
Front rotors
0 2020/10/11 15:47:33
Front caliper
Front caliper
0 2020/10/11 15:47:38
Rear caliper
Rear caliper
0 2020/10/11 15:47:43
0 2020/10/11 15:50:51
0 2020/10/11 15:50:55
0 2020/10/11 15:51:00
0 2020/10/11 15:51:03
0 2020/10/11 15:54:21
0 2020/10/11 15:54:25
0 2022/06/21 23:51:56
1 2022/06/21 23:52:11
0 2022/06/21 23:59:32
C code
C code
0 2022/10/05 20:57:27