RX7Club.com - Mazda RX7 Forum
Very simple wiring to the stock connector.
Very simple wiring to the stock connector.
0 2013/12/09 15:48:16
Final test fit.
Final test fit.
0 2013/12/09 15:48:16
not too much had to be cut in order to fit the lights.
not too much had to be cut in order to fit the lights.
0 2013/12/09 15:48:16
Simple strip of aluminum and three bolts nuts were used to mount the headlights which retained OE adjusters from the Lexus making the simple mount possible.
Simple strip of aluminum and three bolts nuts were used to mount the headlights which retained OE adjusters from the Lexus making the simple mount possible.
0 2013/12/09 15:42:09
Wired up! This was wired directly to the normal harness with spade connectors so reverting to flipping headlights is a snap.
Wired up! This was wired directly to the normal harness with spade connectors so reverting to flipping headlights is a snap.
0 2013/12/09 15:38:39
My friend who's garage I was borrowing was having some fun too!
My friend who's garage I was borrowing was having some fun too!
0 2013/12/09 15:38:39
Needed this after my skin soaked up all the fiberglass. Used nothing but simple goggles and a small mouth mask.
Needed this after my skin soaked up all the fiberglass. Used nothing but simple goggles and a small mouth mask.
0 2013/12/09 15:32:47
A DVD was used as a stencil on the Aluminum flashing for the headlights.
A DVD was used as a stencil on the Aluminum flashing for the headlights.
0 2013/12/09 15:32:47
FC2000 headlight conversion is successful! for now it runs halogen bulbs in the projectors which are still much nicer then sealedbeam.
FC2000 headlight conversion is successful! for now it runs halogen bulbs in the projectors which are still much nicer then sealedbeam.
0 2013/12/09 15:25:57
Simple aluminum flashing was placed under the lenses to prevent the refracted sunlight from burning the bumper like a magnifying lens. Plus it looks cool. XD
Simple aluminum flashing was placed under the lenses to prevent the refracted sunlight from burning the bumper like a magnifying lens. Plus it looks cool. XD
0 2013/12/09 15:25:57
Last step! Cut out the Lexan using a box cutterand applied weather stripping between the Lexan and bumper for the rain.
Last step! Cut out the Lexan using a box cutterand applied weather stripping between the Lexan and bumper for the rain.
0 2013/12/09 15:25:57
End result! Just in time for an Autocross at Mazda Laguna Seca! Beat a Lotus and got to show off my custom Rotary Wing mounts!
End result! Just in time for an Autocross at Mazda Laguna Seca! Beat a Lotus and got to show off my custom Rotary Wing mounts!
1 2013/12/09 14:57:11