RX7Club.com - Mazda RX7 Forum
Here's the connection into the DP with a single pipe...
Here's the connection into the DP with a single pipe...
0 2021/12/01 17:05:12
Yellow cursor is at 11.5psi boost, just when the MAP limit kicked in. Y
Yellow cursor is at 11.5psi boost, just when the MAP limit kicked in. Y
0 2021/12/01 17:21:07
Detail of how the 2x dump tubes mate up with the DP
Detail of how the 2x dump tubes mate up with the DP
0 2021/12/01 17:52:02
This detail shows my heater hose relative to the dump pipes. There's at least an inch+ clearance there, and the hose is secured with clamps so it won't hit the pipes, but I think I'll be replacing that heater hose section with some aluminum piping.
This detail shows my heater hose relative to the dump pipes. There's at least an inch+ clearance there, and the hose is secured with clamps so it won't hit the pipes, but I think I'll be replacing that heater hose section with some aluminum piping.
0 2021/12/01 17:52:06
And fully installed, view from below.
And fully installed, view from below.
0 2021/12/01 17:52:08
Parts after I wrapped them
Parts after I wrapped them
0 2021/12/01 17:52:11
Here's all the parts - modified DP, and the new dump tubes before I wrapped them with lava header wrap.
Here's all the parts - modified DP, and the new dump tubes before I wrapped them with lava header wrap.
0 2021/12/01 17:52:14
Here's the patch they had to do to fix the hole in the DP from the failed version 1 attempt.
Here's the patch they had to do to fix the hole in the DP from the failed version 1 attempt.
0 2021/12/01 17:52:17
0 2021/12/12 13:59:11
0 2021/12/21 06:02:36
And this picture (also pass. side) shows that small bracket (yellow cad. plated w/M8 bolt/12mm bolt head) that needs to come out on both sides.
And this picture (also pass. side) shows that small bracket (yellow cad. plated w/M8 bolt/12mm bolt head) that needs to come out on both sides.
0 2021/12/28 09:58:12
This is the passenger side, showing the front A-pillar side with the seat belt track partially removed & hung out of the way enough to make room for the sunroof assy. to come out.
This is the passenger side, showing the front A-pillar side with the seat belt track partially removed & hung out of the way enough to make room for the sunroof assy. to come out.
0 2021/12/28 09:58:19
0 2022/01/12 17:09:45
Normal - key hidden
Normal - key hidden
0 2022/01/23 10:09:21
With key removed
With key removed
0 2022/01/23 10:09:33
Picture of before & after static flow test results when I last had these FI's serviced in January 2021.
Picture of before & after static flow test results when I last had these FI's serviced in January 2021.
0 2022/01/24 16:04:30
Detail of injector electrical connectors, top (primaries) uses an EV1 style connector; bottom (secondaries) use the Denso/Sumitomo style connector
Detail of injector electrical connectors, top (primaries) uses an EV1 style connector; bottom (secondaries) use the Denso/Sumitomo style connector
0 2022/01/24 16:04:39
Picture of injectors with top hats removed
Picture of injectors with top hats removed
0 2022/01/24 16:04:49
Picture of injectors with "top hats" installed; top (purple) ones are the 2100 cc/min secondaries, bottom ones are the 876 cc/min primaries
Picture of injectors with "top hats" installed; top (purple) ones are the 2100 cc/min secondaries, bottom ones are the 876 cc/min primaries
0 2022/01/24 16:04:59
Open pouch with tools it contained. Looks like there are slots for 2 more wrenches adjacent to the 1 wrench it had, and perhaps another screwdriver on the other side? The jeweler's screwdrivers were in the slots along the pouch's center spine.
Open pouch with tools it contained. Looks like there are slots for 2 more wrenches adjacent to the 1 wrench it had, and perhaps another screwdriver on the other side? The jeweler's screwdrivers were in the slots along the pouch's center spine.
0 2022/01/25 08:32:50
0 2022/01/25 08:32:56
Closed pouch
Closed pouch
0 2022/01/25 08:33:07
0 2022/01/26 08:05:18
0 2022/01/26 08:05:29
Connector side detail
Connector side detail
0 2022/01/26 08:16:16
Bottom side view
Bottom side view
0 2022/01/26 08:16:27
Top side view
Top side view
0 2022/01/26 08:16:36
Surface near the OMP hole.
Surface near the OMP hole.
0 2022/01/26 09:39:59
Another surface shot near the OMP hole, better view of what feels like just superficial rust stains
Another surface shot near the OMP hole, better view of what feels like just superficial rust stains
0 2022/01/26 09:40:07
0 2022/01/26 09:40:15
Area from exhaust port to leading plug hole
Area from exhaust port to leading plug hole
0 2022/01/26 09:40:22
View of surface by both plug holes
View of surface by both plug holes
0 2022/01/26 09:40:31
0 2022/01/26 09:40:38
No knock sensor bung, so that eliminates S5 front housings
No knock sensor bung, so that eliminates S5 front housings
0 2022/01/26 09:40:45
0 2022/01/26 09:40:53
Exhaust port has the diffuser insert, so it must be an NA housing
Exhaust port has the diffuser insert, so it must be an NA housing
0 2022/01/26 09:41:02
No groves for the inner/outer seals, so it has to be a post-1985 13B
No groves for the inner/outer seals, so it has to be a post-1985 13B
0 2022/01/26 09:41:11
So it's a 13B...
So it's a 13B...
0 2022/01/26 09:41:19
0 2022/01/26 15:35:34
This is the config for the FD VS sensor wired to DI#1; your calibration # may be a little different if your tire sizes or gear ratios differ from mine. I calibrated mine by driving a steady speed, and using a GPS/nav app to monitor my speed, set the cal # so the speed displayed in PCLink agreed.
This is the config for the FD VS sensor wired to DI#1; your calibration # may be a little different if your tire sizes or gear ratios differ from mine. I calibrated mine by driving a steady speed, and using a GPS/nav app to monitor my speed, set the cal # so the speed displayed in PCLink agreed.
0 2022/02/06 14:05:48