RX7Club.com - Mazda RX7 Forum
0 2021/08/05 11:09:28
And this shot is the filter installed on the bracket, using the saddle bracket that came with it.
And this shot is the filter installed on the bracket, using the saddle bracket that came with it.
0 2021/08/05 11:09:35
This is a detail of where the sheet metal press fits in the space between my 2DIN frame cage and the dash radio opening.
This is a detail of where the sheet metal press fits in the space between my 2DIN frame cage and the dash radio opening.
0 2021/09/01 09:31:37
Test piece, needs some trimming but I think I can get this concept to work without any cutting of the OEM plastic
Test piece, needs some trimming but I think I can get this concept to work without any cutting of the OEM plastic
0 2021/09/01 09:31:46
0 2021/09/01 09:31:54
0 2021/09/19 16:47:17
0 2021/09/19 16:59:12
0 2021/09/19 17:02:58
0 2021/09/19 17:07:19
0 2021/09/19 17:25:06
No radio, no speakers, but more gauge holes than I will ever use... and I'm not digging the lightweight purple shift knob
No radio, no speakers, but more gauge holes than I will ever use... and I'm not digging the lightweight purple shift knob
0 2021/09/20 16:29:53
Here's the hatch area that once had a Bose system in it.
Here's the hatch area that once had a Bose system in it.
0 2021/09/20 16:30:01
And here's the hacked passenger side storage bin where the PO relocated a full size battery.
And here's the hacked passenger side storage bin where the PO relocated a full size battery.
0 2021/09/20 16:30:08
0 2021/09/20 16:54:53
Radio installed with refinished HVAC & shifter panels
Radio installed with refinished HVAC & shifter panels
0 2021/09/20 16:55:45
Aluminum knob
Aluminum knob
0 2021/09/20 17:02:16
Leather refinished FD OEM knob
Leather refinished FD OEM knob
0 2021/09/20 17:02:23
That silver matting on the top is the Noiko sound insulation. It's a rubbery self-adhesive substance, you just apply and use a roller to flatten it down
That silver matting on the top is the Noiko sound insulation. It's a rubbery self-adhesive substance, you just apply and use a roller to flatten it down
0 2021/09/20 17:17:23
And here;s the repurposed dishwasher sound insulation that I cut to fit the floor area. It simply lays in there, and is about 1" thick when uncompressed
And here;s the repurposed dishwasher sound insulation that I cut to fit the floor area. It simply lays in there, and is about 1" thick when uncompressed
0 2021/09/20 17:18:08
And here's the Garage Alpha carpet mat to finish the hatch area.
And here's the Garage Alpha carpet mat to finish the hatch area.
0 2021/09/20 17:18:15
Restored driver's side belt assembly
Restored driver's side belt assembly
0 2021/11/09 16:40:51
Refinished bins
Refinished bins
0 2021/11/09 17:13:11
Refinished door panels
Refinished door panels
0 2021/11/09 17:13:21
Before shot of door panels, prepped & ready for SEM paint
Before shot of door panels, prepped & ready for SEM paint
0 2021/11/09 17:13:28
0 2021/11/09 17:13:36
View of cabin from driver's side. The
View of cabin from driver's side. The
0 2021/11/09 17:13:46
View of cabin from passenger side
View of cabin from passenger side
0 2021/11/09 17:13:55
Before shot of rear quarter trim
Before shot of rear quarter trim
0 2021/11/09 17:14:03
Quarter panel spraying in process...
Quarter panel spraying in process...
0 2021/11/09 17:14:10
Refinished bins, quarter trim and hatch divider installed
Refinished bins, quarter trim and hatch divider installed
0 2021/11/09 17:14:19
Driver's side door panel installed
Driver's side door panel installed
0 2021/11/09 17:14:31
A bunch of the smaller refinished panels
A bunch of the smaller refinished panels
0 2021/11/09 17:14:37
My solution to the battery mod hacked passenger side bin - using a tool bag to restore the hacked bin to functional. It ain't pretty, but it works!
My solution to the battery mod hacked passenger side bin - using a tool bag to restore the hacked bin to functional. It ain't pretty, but it works!
0 2021/11/09 17:19:17
Pulley, new bearing, old bearing and socket used to press it out with a bench vise.
Pulley, new bearing, old bearing and socket used to press it out with a bench vise.
0 2021/11/22 12:54:01
Finished pulley with new bearing
Finished pulley with new bearing
0 2021/11/22 12:59:17
Then I realized DUH, I can use the old bearing and get a more even/accurate press in since it fits better!
Then I realized DUH, I can use the old bearing and get a more even/accurate press in since it fits better!
0 2021/11/22 12:59:20
I started pressing in new bearing with this socket...
I started pressing in new bearing with this socket...
0 2021/11/22 12:59:23
0 2021/11/26 11:24:49
And here's the hack job they did to connect the now single skinny dump tube to the DP - I went nuclear when I saw this!
And here's the hack job they did to connect the now single skinny dump tube to the DP - I went nuclear when I saw this!
0 2021/12/01 17:04:56
Here's the 2-into-1 "Y" from the waste gates. Note that the diameter of the outlet is still the same size as the dump tubes, NOT a larger diameter pipe.
Here's the 2-into-1 "Y" from the waste gates. Note that the diameter of the outlet is still the same size as the dump tubes, NOT a larger diameter pipe.
0 2021/12/01 17:05:03