Blitz fmic/Apexi intake pics
#1
Blitz fmic/Apexi intake pics
Ok, I promised a couple of you that I would post some pics of the Blitz fmic in a previous thread so here they are. I apologize for the shotty lighting, I had to take them with my flash. Feel free to ask any questions, I can take other shots if something isn't shown that you would like to see.. if I have to get under the car and take off the underbelly pan you will have to wait a few days.
Matt
93 SSM
Matt
93 SSM
#6
Speed Mach Go Go Go
iTrader: (2)
Join Date: Oct 2001
Location: My 350Z Roadster kicks my RX7's butt
Posts: 4,772
Likes: 0
Received 2 Likes
on
2 Posts
I meant the radiator
THis stupid thing. I enhanced the pics but it wouldn't let me upload them. How can they be too big if you posted them, ack
Anyhow looks tight. That's cool you were able to fit the fog/driving lights back on.
Anyhow looks tight. That's cool you were able to fit the fog/driving lights back on.
#7
Nope, there is tons of space left over on the driver side of the car. You definitely couldn't get away with the stock size battery, that one is just too big. The instructions have you trim off a good part of one side of the battery tray to remount it onto the car without interferring with the new location of the radiator. I had an Odyssey battery already, but you could even use a larger one like a Miata battery. Blitz even gives you new brackets to hold down the battery.
Matt
93 SSM
Matt
93 SSM
Trending Topics
#11
Originally posted by purepsi
any problems with the a/c and radiator??!!!
any problems with the a/c and radiator??!!!
Real world now.. well cruising water temps have not increased noticeably so far. But the hottest it got over the weekend was about 80F where I was, highway driving temps and stop and go temps were about the same. We'll see what happens when summer hits.
Matt
93 SSM
#12
Originally posted by ISUposs
agreed.
mjw, is that your car in your avatar(sp?)?
if so, do you have any more pics of it? it looks bad ***!!
agreed.
mjw, is that your car in your avatar(sp?)?
if so, do you have any more pics of it? it looks bad ***!!
Matt
93 SSM
#19
Originally posted by RoadKill
I'm thinking about getting a Blitz FMIC also. How hard was it to install? How long did it take you?
I'm thinking about getting a Blitz FMIC also. How hard was it to install? How long did it take you?
Matt
93 SSM
#21
Junior Member
Join Date: Mar 2001
Location: Rosemead, CA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by twinturboteddy
HOMEBOY just likes it because it is a BLITZ.
HOMEBOY just likes it because it is a BLITZ.
No need to hack up the bumper or reinforcements. Lot easier to install than the Greddy...
Who's gonna volunteer to help me install it?
Last edited by RoadKill; 05-06-02 at 05:19 PM.