Momo steering wheel installation
#1
Passenger
Posts: n/a
Momo steering wheel installation
Hi All,
I'm planning to install my Momo competition wheel with the mazdaspeed adapter this comming weekend. Do i need to get a steering wheel puller to remove the old wheel?
Also, did anybody have any problem with putting the wheel back for the annual inspection?
TIA
I'm planning to install my Momo competition wheel with the mazdaspeed adapter this comming weekend. Do i need to get a steering wheel puller to remove the old wheel?
Also, did anybody have any problem with putting the wheel back for the annual inspection?
TIA
Trending Topics
#9
Adrenaline
Join Date: Feb 2001
Location: Long Island, NY
Posts: 1,261
Likes: 0
Received 0 Likes
on
0 Posts
I'm using the Momo Club 4 steering wheel with the Momo hub. The Momo hub is cheaper than the Mazdaspeed. I don't have any problems with the airbag light and my horn works.
#13
Full Member
Join Date: Mar 2001
Location: Austin, TX
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
I've got another question about the Momo adapter.
I've got one in my car to go along with the wheel. I pulled the airbag computer, so I'm not concerned about the resistor, but...
How do you hook up the horn?
With the cruise and airbag gone, there's, what, one black wire coming up out of the column, and you attach it to the hub. You wire up the little horn button deal, and that's as far as I've got.
My mech told me there was more wiring I needed to do, but he was in a hurry so I couldn't get more information out of him when were talking about it. He said I needed a curly-cue style wiring cord (and suggested I scavenge one off a test light or something), and it needed connecting up, but didn't say which ends to what.
Anybody got the info?
I've got one in my car to go along with the wheel. I pulled the airbag computer, so I'm not concerned about the resistor, but...
How do you hook up the horn?
With the cruise and airbag gone, there's, what, one black wire coming up out of the column, and you attach it to the hub. You wire up the little horn button deal, and that's as far as I've got.
My mech told me there was more wiring I needed to do, but he was in a hurry so I couldn't get more information out of him when were talking about it. He said I needed a curly-cue style wiring cord (and suggested I scavenge one off a test light or something), and it needed connecting up, but didn't say which ends to what.
Anybody got the info?
#14
Eats, Sleeps, Dreams Rotary
Bring back an old thread in hopes of finding out something..
with the steering wheel and hub install require you to get rid of the steering column? I have the column mount boost gauge and like it there so I was just wondering if I had to can that.
with the steering wheel and hub install require you to get rid of the steering column? I have the column mount boost gauge and like it there so I was just wondering if I had to can that.
#15
RX-7 Bad Ass
iTrader: (55)
You don't have to get rid of the steering column - that stays there.
Dale
Dale
Thread
Thread Starter
Forum
Replies
Last Post
competition, fc, fd, fds, hub, install, installation, manual, momo, momocompetition, rx7, rx7club, steering, supra, wheel