REACTIVE RACING makes 680rwhp turbo only!!!

Reply Subscribe

Thread Tools

Search this Thread

Jun 13, 2003 | 08:39 AM

ErnieT

Thread Starter

Living life 9 seconds at a time

iTrader: (2)

Joined: Feb 2001

Posts: 6,541

Likes: 0

From: Abingdon, Md

REACTIVE RACING makes 680rwhp turbo only!!!

Sup guys. Demetrios just came back from the dyno. At 30lbs of boost he made 682rwhp!! This is on a 13B with C16. I don't know of many people, if any, who have made this much power out of a 2 rotor on c16, turbo only..... All this on stock 2mm apex seals...with an agressive porting job by Demetrios. SHould be the right combo for a low 9 or even a high 8 second pass. If the rain holds out, the Battle of the Imports race this Saturday at VMP in Virginia will be one hell of a show! I'll post the dyno sheet tonight when I get home.

Tell me, who do ya think will tune my RX7 next year??!!

Especially since I'll be running almost the same setup....Should be able to put the Supra's in their place finally.....
Hope to see you guys at the race.

Jun 13, 2003 | 09:02 AM

carboy

Passenger

Posts: n/a

wow. tell us more about the combo?

Jun 13, 2003 | 09:15 AM

ErnieT

Thread Starter

Living life 9 seconds at a time

iTrader: (2)

Joined: Feb 2001

Posts: 6,541

Likes: 0

From: Abingdon, Md

Electromotve Tec 3 ecu, a **** load of fuel, and a huge turbo

Jun 13, 2003 | 11:34 AM

ErnieT

Thread Starter

Living life 9 seconds at a time

iTrader: (2)

Joined: Feb 2001

Posts: 6,541

Likes: 0

From: Abingdon, Md

Here ya go....

Jun 13, 2003 | 11:39 AM

SPOautos

Hey, where did my $$$ go?

Joined: Feb 2001

Posts: 4,413

Likes: 0

From: Bimingham, AL

Damn, thats nice

STEPHEN

Jun 13, 2003 | 11:41 AM

93 R1

Rotary Freak

Joined: Aug 2001

Posts: 1,734

Likes: 0

From: maryland

682 hp 500tq. Very nice.

Tell Demetrios to check his PM's on the other forum

Jun 13, 2003 | 11:52 AM

rotor_dee

Senior Member

Joined: May 2001

Posts: 395

Likes: 0

From: Baltimore, Maryland USA

Ernie I can always count on you to let the cat out of the bag I cannot take the credit all myself it was a team effort. I want to thank Rus for his hard work and dedication. He was at the dyno with me from begining to end to include all the turbo changes and various boost controllers. I would not have made the change to the tec unit without him.Speaking of boost controllers Ray thank you for letting me use your Apex AVC-R I'm converted no more manual controllers for me. Ernie not quite sure if I want you to post it after all the crap people go through when they do post a dyno sheet.

Demetrios Karagiannis

Trending Topics

Ttt steering rack thoughts

13

504
Engine o ring failure?

10

314
FrankenRex Will Rise: stuffing a GSL-SE into a'79 SA

309

31.7k
RX-7 SA 1979 - European - Aurora White "ETHEREAL"

7

217
6k ignition break up and tach goes wild simultaneously no matter the...

10

335

Jun 13, 2003 | 12:02 PM

fdracer

Rotary Freak

Joined: Jan 2002

Posts: 1,643

Likes: 0

From: l.a.

you guys got your work cut out for you, the supras make double that hp. the msp supra puts down 1350rwhp.

Jun 13, 2003 | 12:11 PM

IRPerformance

Sponsor

iTrader: (41)

Joined: Apr 2003

Posts: 11,347

Likes: 321

From: NJ

wow

Jun 13, 2003 | 12:17 PM

#10

ErnieT

Thread Starter

Living life 9 seconds at a time

iTrader: (2)

Joined: Feb 2001

Posts: 6,541

Likes: 0

From: Abingdon, Md

Quote:

Originally posted by fdracer
you guys got your work cut out for you, the supras make double that hp. the msp supra puts down 1350rwhp.

The Supra's need to make double. They WEIGH double!

Jun 13, 2003 | 12:24 PM

#11

RageRace

Senior Member

Joined: Apr 2003

Posts: 598

Likes: 0

From: Ft. Lauderdale

He may want this top secret, im not sure but, how many and what size injectors is he using? Also what size turbo, and fuel lines? I thought i might give it a shot.

Jun 13, 2003 | 03:46 PM

#12

Wargasm

Weird Cat Man

Joined: Aug 2001

Posts: 2,868

Likes: 3

From: A pale blue dot

I added the dyno to my dyno page at http://www.catenet.net/dyno.php

I spelled D's name wrong, but I can't log in to fix it right now... sorry man!

Brian

Jun 13, 2003 | 03:58 PM

#13

Jerk_Racer

Rotary Freak

Joined: Feb 2001

Posts: 2,149

Likes: 0

From: Okinawa, Japan

rotor dee - Big fat kudos to you! I'll bet there have been plenty of naysayers along the way telling you that your setup won't work or won't last. Especially with the 2mm apex seals. At least that's what I usually see around here. Congrats on showing us what can be done when you do it right.

It just goes to show you it's ALL in the tuning.

Jun 14, 2003 | 04:07 AM

#14

maxcooper

WWFSMD

Joined: Jun 2001

Posts: 5,035

Likes: 4

From: SoCal

Great job Demetrios; that is outstanding! Even with the high peak, that looks like a nice wide power curve compared to the "spike" curves that often accompany such lofty peaks for other cars' dyno sheets.

-Max

Jun 14, 2003 | 06:36 AM

#15

jeff48

Rotorally Challenged

Joined: Apr 2002

Posts: 1,512

Likes: 0

From: Southern Illinois

Demitrios

Unbelieveable---What does the AFR chart look like?
I assume you are "Strip Only" with this car. How are you tuning the midranges?

Kudos and onward to the low 8s.

Jun 14, 2003 | 10:53 AM

#16

Jasil

iwishihad628rwhp

Joined: Nov 2001

Posts: 181

Likes: 0

From: New Orleans

Quote:

Originally posted by fdracer
you guys got your work cut out for you, the supras make double that hp. the msp supra puts down 1350rwhp.

That does not lesson the accomplishment though. There are mustangs with T100 and bigger turbo's putting down 2200whp does that lesson MSP's accomplishment?

Jun 14, 2003 | 11:54 AM

#17

MikeLMR

'Last Minute' Rallying

Joined: May 2002

Posts: 1,193

Likes: 0

From: Lincoln, England

one of the PacPerformance cars in Australia is running 798HP at the wheels ... the article is still in the archives on the pac performance website

http://www.pacperformance.com.au

Inside Pac > Archives > Congratulations Ivan!

Congratulations!
10/1/2002

We would like to congratulate Ivan, owner of the pink Rx3 4 door for putting on a blazing performance at the summernats with an amazing 798 Hp at the wheels from his 13B turbo powered Rx3.

Now that's making a statement! We wonder if that's the highest HP recording from a 13B?!?!
(Engine development, build and tune by Pac Inc. Aust.)

Last edited by MikeLMR; Jun 14, 2003 at 11:56 AM.

Jun 14, 2003 | 10:24 PM

#18

Resource

Banned. I got OWNED!!!

Joined: Sep 2002

Posts: 2,092

Likes: 0

From: Saint Louis

Quote:

Originally posted by MikeLMR
one of the PacPerformance cars in Australia is running 798HP at the wheels ... the article is still in the archives on the pac performance website

http://www.pacperformance.com.au

Inside Pac > Archives > Congratulations Ivan!

Congratulations!
10/1/2002

We would like to congratulate Ivan, owner of the pink Rx3 4 door for putting on a blazing performance at the summernats with an amazing 798 Hp at the wheels from his 13B turbo powered Rx3.

Now that's making a statement! We wonder if that's the highest HP recording from a 13B?!?!
(Engine development, build and tune by Pac Inc. Aust.)

Big differance bettwen Dem's car and the PAC car. The pac car is running alcohol and spraying. Dem's car is on gas and just turbo. None the less, GREAT NUMBERS!

Jun 15, 2003 | 03:59 AM

#19

CTHIS RX7

Full Member

Joined: Sep 2002

Posts: 170

Likes: 0

From: Brisbane, Australia

Quote:

Big differance bettwen Dem's car and the PAC car. The pac car is running alcohol and spraying. Dem's car is on gas and just turbo. None the less, GREAT NUMBERS! [/B]

The PAC car is running C16.