Hi friends, i need help,
i saw today that under the carburator i loose water also if the engine is off, i dont know what causes it, i continue to loose water from radiator and i have to fill it constantly, but the temperature of the engine its always OK.

i will show you the foto that i have do at the water dispersion:





Now zoomed:





Under here look ine the dark side.. water:






PLZ HELLPPPP



others foto of the car:

http://rx7.baudnet.com > Mycar > FOTO

or the foto that i have do today with water dispersion http://www.baudnet.com/foto/22-03


thanks!!!

 

 

plz help, i donno wheree the problem is

 

Seal the hose better?

 

its sealed, but what hose do you mean?

 

Looks like that's the intake manifold o-rings. You'll need a new pair along with a new intake manifold gasket.

 

ohhh probably is that the problem, do you know where can i find / buy new ring O and intake manifold ... ?

have you a picture of thise part so that i can localized it in my engine and look if they work good or not?

 

mazdatrix should sell the gaskets...

http://www.mazdatrix.com/c-2.htm

that's the link.

I already sent you a pm suggesting it's the intake mani, so get yourself a gasket and get running again. Just pull the intake manifold/carb as a unit and get those puppies overnighted or something.

Good luck!

 

thanks a lot patch for the istruction that you have send me.
next fryday i will try to do that...


two questions:
1) Mazdatrix is good? for pay with credit card.. also if i leave in italy?

2) i will buy the intake gasket but the manifold O-ring where can i find it?



thanks.. ahhh another questions:

its simple or complicated to keep out the carburator and the gasket for see if its nasty or not?


thanks a lot!!! to all!

 

1) They should ship overseas, it'll just cost more to get it there quickly. They come pretty highly recommended by rotary folks.

2) O-rings are futher down the page

You can remove the intake manifold with the carb still on it. Once it's out, it should become pretty obvious if the gasket is any good.

If you don't have the emissions removed, there's no time like the present Click my sig to show you the way. (it also makes it easier to remove the carb should you ever want to).

 

ohhh yeah!

i have do the order with mazdatrix!!! =) my first internet shopping outside italy :


1)
1
13-111B-1881
GASKET IN MANIFOLD
$4.76


2)
1
95-018B-9999-81
BOOK MANUAL
$82.66


5)
1
13-1130-8527
GASKET IN MANIFOLD
$3.30


6)
1
13-1130-8527
GASKET IN MANIFOLD
$3.30



Total:
$94.02


if all will go fine end, i will buy much things on that internet shopping mazda center! its wonderfull!!! and have many parts that i neeed!!!!!
also the wing!


thanks patch super modder =) i hope to do not mistake when friday i will change the parts.

 

This is such a cool shot....it screams european! Thanks, scruch! Good luck on the repair and post any questions you have any time they come up during the session...

 

If your gonna order some gaskets from the US,you might as well get doubles of each..

Send some Italian girls to pick them up

 

you'll get an e-mail from mazdatrix now saying they don't accept european credit cards

I did 6 months ago, don't think they've changed much since then

 

Well that stinks... Is there any way around this problem? Where do you get your parts?

 

buy them from the specialists in the UK or buy them from Mazda

 

True, there shouldn't be a big difference in price between Mazda and Mazdatrix's prices.

 

yes but theres a huge difference between US and UK/european prices

 

Please let me know how the installation of those gaskets and o-rings goes.

 

uhm i hope VISA will work with mazdatrix, they have me send no email.. but also no email that say me that the order is confirmed... anyway i try to phone their if tomorrow i receive no email..


but in UK where? do you know a website that sells rx7 parts?
the italy mazda division is very slow and cost much!, and there are only stupid people that know nothing about rx7 engine.




ok =) friday i will try to fix it also if the new parts are not arrived.



THANKS VERY MUCH TO ALL OF YOU FRIENDS !!! here in italy isnt anybody that know how a rotor engine work..! thanks! for help!

 

I sent them an e-mail when I 1st got my car about buying hatch struts. they replied saying they only accept american visa cards, not euro ones

no online stores in the uk, but plenty of specialists

try

http://www.wgtautodevelopments.co.uk/ WGT
http://www.jimmys-rx7.co.uk/ Jimmys
http://www.rxmotors.co.uk/ RX motors <- nice guy
http://www.mazdarx7.co.uk/ Rotechnics
http://www.reworx.co.uk RE Worx
http://www.hurleyrotary.com Hurley should have engine parts

 

Cant really tell by the photo, but I assume you mean where the intake manifold meets the motor. Id say if thats where the coolant is puddling up, Id say its one of the manifold O rings

 

what size are the O rings ? he may be able to buy some in Greece , Viton O rings are pretty common

then it would be just a case of making a new gasket using some gasket material and the old one as a guide (or the manifold)

on getting parts in europe , is anyone taking a trip over to the UK in the near future I could do with some bits

 

Can you get a money order and send it to Mazdatrix instead of paying with your credit card?

 

yes but I was thinking more of the savings to be made on shipping

Don't worry I can get the bits I need from Rotechnics as they are an RB dealer ... they just charge about 1.5 times more