Hiya

Long term lurker though you might like to see my build

This is a few pics from since I have had the car, more of the build to follow

From this

To this



Striped for the cage

Cage taking shape

 

Dummy engine in

Mounts done

First branch of the mainfold

Sexy pedal box


Billet front cover

The heart of the beast!!!!!

Last but not least the dash
[IMG]http://i279.photobucket.com/albums/kk129/mattfduk/MY%20FD/Photo-0052-1.jpg[/IMG

 

Will be ceramic coated


Equal to within 5mm:smokin:
Finished mainfold



Pic of one of the intakes, hard to see but it has a glitter finish

Rear shot looking more like a car now

 

Front shot with the screen in

Pics of a few more bits I have bought

And my FEED BGW



Padded the cage

 

Pulled out the front subframe to weld and paint


Subframe back in

Fresh paint in the bay

Engine mounts painted up

 

First step to RE-A light






Couple of random ones

 

To get this back on track heres some more pics
Shine carbon diffuser


Engine mounts plated


Painted tow eye

Coil plate

 

Beautiful work.

What front bumper is that?

 

7 Litre dry sump tank

Oil coolers one 19 row and one 34 row both with -12 fittings


New wheels CE28N in 8.5J and 9.5J




And a bit of engine history as fun

 

Couple of pics from today
The boys at WGT were not happy with the paint in the engine bay so it got redone today



Both oil coolers now mounted too


The rotors are being finished off today and tomorrow so by next week we should have an engine

 

The last step of the new wheels


Last of the stickers for now


The dash looking very complete


This now has the gauges in and is ready to mount

 

Modded oil tank to clear the lights


Random one

Braking system

Next for the start of the money shots

 

Engine getting ready for the build






The engine didnt get built today but the rotors are built up ready the plates are all re-cleaned with everything ready and the apex seals have been measured and laid out
Built engine tomorrow as the thick 20B centre plate is already on the engine stand

 

Few more pics from today


And the best picture I could have got today

Few pics from today

 

Very nice work on the clutch release even though it will never be seen again!


Oil system under wat



Shine Diffuser


Engine more dressed

 

 

Thats all long gone mate! Was gone before 10.30 when the boys saw it!!!
Clever little V fitting

Gagues mounted

Rad fitted back in the stock place

Few randoms!

 

Some pics to go on with

 

 

Update time:thumbs:








This is ATW's but as you can see the power is peaking at 7500 not the 8500-9k it is supposed to so we will be fitting a 4 inch rear section to make doubly sure that its that causeing the restriction before then making a custom 4 inch system

Full spec, well what I can remember!

Exterior

RE-A H11 Sleek Lights
Works9 Front
Odula Side Skirts
Odula Type 1 Bonnet
Odula Type 1 Fenders
Feed Carbon Side Steps
Shine Carbon Pro Diffuser
Carbon Vortex Generators
Carbon Central Divider
Feed GT Wing
ARP Carbon Mirrors
Custom Front Undertray/Splitter
Heated Screen

Interior

Flocked Dash
FEED Clocks 10k Rev/300kph
Racetech Gauges (Oil Pressure, Oil Temperature, Water Temperature)
Carbon Gauge Panel
Carbon Door Cards
Custom Cages Weld in Cage
Bride Artis II Seats
Custom Seats Mounts
Carbon Floor
Momo Race Steering Wheel
Driftworks Snap off Boss
Fully Striped of Heater, Carpet, Sound Deadening & Stereo

Chassis

KTS SC Coilovers (12kg Springs)
Racing Beat ARB’s
Racing Beat Front Strengthening Bar
Tein Strut Brace
Volk CE28N 9.5J ET40F/ET34R
Toyo R888 255/40/17’s all Round
Custom PPF (RX8 Front RX7 Rear)
Custom Prop
K Sport 356mm 8 Pots
Willwood Pedal Box
ABS Removed
RX8 6 Speed box
Excedy Twin Plate


Engine

20B PP Race Engine
9.7 High Compression Rotors (Clearenced, Balance & Lightened)
Jenvey 50mm Throttle Bodies
Jenvey Intake Trumpets
Custom Air Box
Custom Intake Manifolds (Powder Coated Glitter White)
Custom Exhaust Manifold (Ceramic Coated White)
WGT Back Box
Silenced Mid Box
Custom Engine loom
DTA PRO Engine Management
Pace Oil Tank (7 Litre)
Pace Oil Pump (Twin Scavenge)
Cusco Catch Tank
Davies Craig Water Pump
WGT Radiator
Setrab Oil Cooler (19 and 34 Row -12 Fittings)
Direct Primary Injection (In Old Oil Jet Holes)
Custom Fuel Rails
Stock Lift Pump
FPR
Bosch 044 Pump
Swirl Pot

 

Bit of a tease of the finished car

 

Already as the paint shop being painted

Got a new rear end being built with a very short 4.7 final drive and 1.5 way diff

Also got a GT wing due any day, can't wait now:thumbs:

Some pics





All the holes are drilled now only needed 2 more on the very rear outside edge.
I will be painting the legs black asap and fingers crossed get the lights fitted tommorrow when the covers are back

 

Light covers back




Really happy with them, just need to get the wing legs back and rivit the covers down and fit the spacers now

 

 

More pics here too

http://s279.photobucket.com/home/mattfduk/index