(INTERIOR) RX8 seat in my 1st gen =)
(INTERIOR) RX8 seat in my 1st gen =)
I FINALLY found the perfect seat for my 1st gen project! I had to have the rotary headrest-thing! I have the passenger seat in my garage and, unfortunately it still has the airbag! I'll have to research the dismount trick before I stick it in there.
I have a simple pictorial write up with some engineering notes in regards to mounting the driver's side seat with minimal mods. If I can ever remember our Roadrunner homepage password, I'll try to post more details on my efforts.
I have a simple pictorial write up with some engineering notes in regards to mounting the driver's side seat with minimal mods. If I can ever remember our Roadrunner homepage password, I'll try to post more details on my efforts.
Very nice.
I'm till debating between getting those or the corbeau's
http://www.corbeau.com/products/a4/a4.shtml
I can get both set's for about $600, but you just my have leaned me towards the rx8 seats.
I'm till debating between getting those or the corbeau's
http://www.corbeau.com/products/a4/a4.shtml
I can get both set's for about $600, but you just my have leaned me towards the rx8 seats.
Seat height: Good as I am 5'11, and the seat is dropped down to lowest position. Awesome fit within the car and fits me great.
I managed to get the driver's seat from Ebay for $125 +$50 shipping and I picked up the passenger (that has the airbag) for $250. I picked up in Winston Salem. So, got them both for $425; not too bad as they were my top choice for replacement seats.
They are nice quality...and did I mention that they have rotary headrests? lol
I managed to get the driver's seat from Ebay for $125 +$50 shipping and I picked up the passenger (that has the airbag) for $250. I picked up in Winston Salem. So, got them both for $425; not too bad as they were my top choice for replacement seats.
They are nice quality...and did I mention that they have rotary headrests? lol
Trending Topics
Well, here are details for the first two fasteners. I'll make an effort to post a section for this project on our soon-to-be homepage when we get a new password. *chuckle* Somehow we lost our password.
Thread
Thread Starter
Forum
Replies
Last Post
Boriquaguerrero
2nd Generation Specific (1986-1992)
20
Apr 22, 2019 01:15 PM
craaaazzy
Comments and Suggestions Archive
3
Aug 21, 2015 02:00 PM





