12 hrs later and still no video ???????? I must be screwing something up ..

Who knows

 

What would they look like? I'd probably be interested. I have been inteding to get decals made up, but i just haven't gotten around to it.

 

The video is finally visible. Good job Va. Though for 80 megs, I was hoping for a longer clip, it was only like 40 seconds.

 

I did not take the video , it was given to me on a disk and I just transfered it to the site . Oh well , it sure took long enough to post

Va

 

submit ideas for how yall want them to look i was thinking about geting the same design as the sticker sumwhat

its being laser cut so feel free to do what would look good

 

I kind of like the existing club logo. I am very old school about logos. I severely dislike the modern trend of making logos a "swish" or a brushstroke or something simple and stupid. I like meaningfulness in logos and I really like the meaning in ours. But you are making them, so the final choice is yours. Just give us an idea of what you expect it to lok like and judge the interest. I know I would probably get one as long as the cost ws not out of line.

 

i know when we go to get mine made ill get one that looks like the original sticker like one

then of course a bamboo motorsports one to replace the mazda badges
and a gsl-t2 badge

 

Kenny whos that guy you mentioned that can anodize

im willing to make a trade or sumthing unless he will do my ic piping for free lol

 

got my plates w0000000000000000

 

hey guys i'm new to the forum..im in the va beach area..i've got a '88 TII and was wondering if u guys could help me with my idle problems..? im still searching the forum, but i figure help in person is much better than me fumbling through endless threads of info

 

How about a little more info?

 

In the very near future I am in need of some 79-80 RX7 parts. Just about any interior part might be needed, and I need some other odds and ends like the rear license plate lights and mounts. I am not sure what else, but if any of you have any of these let me know. If anyone has a 79-80 parts car or knows of one just touch base with me.... Thanks.

 

I posted some pics of my FD in case anyone wants to take a peek:
https://www.rx7club.com/showthread.p...40#post4771140

 

your in luck i have alot of parts for an s4 i will bring them sat night you want i also have black door pannels.

 

79-80 is S1........

 

Who wants to help install a S5 engine in an FB?

or trade for a Red FD? *wink*

 

If there's anything I can do to help, let me know.

 

hi everybody, im new to the whole owning an rx-7 thing as of about a month ago. i have a red 87 sport and i was wondering if you guys know anybody in the chesapeake area that will put 3 inch straight pipes on my car w/ a cat for inspection purposes. also price ranges for this would help out alot. thanks

 

i miss read i apologize

btw how was langley tonight...did it happen or no

but yeah Kenny or someone with emissions removal experience please send me a message or if you have my number call me sumtime after 3 tommorow

the meets in two days and we didnt get **** done last night

so help

basicly heres what needs to be done

tonight
alll wiring harness complete including taping it up

tommorow
engine spaced so the pitman arm will clear pan
trans mount finished
drive shaft bolted in
fuel lines
tighten down all bolts on engine
throttle cable
seal all unneaded vacuum nipples

friday
get starter
get radiator flex hose and electric fan
battery cables ran from new batt location
exhaust welded up (easy 2 hour job) (strait off downpipe and back then come out infront or rear wheel,no muffle just pipes)
dash put back in
seat put back in

get premium gas
oil
antifreeze

start?(cross fingers)

and i beleive thats it i cant wait to hear her growl

then i take her to work and do the suspension install springs and struts


btw fs i have

t2 driveshaft
s4 parts pm me if you want a certain part
door panel
t2 radiator
na radiator

 

Sport???? I haven't had much exhaust work done, but I would think most muffler shops would be able to install a simple downpipe. Or are you talking about more than that? Do you already have an exhaust kit? Is it downpipe to to the mufflers? I removed my old exhaust, I can't see why you wouldn't be able to do it yourself if it's a direct fit.

 

killa it shouldnt be hard

not many muffler shops will strait pip your cat but get them to do the pipes with a regular cat then gut the cat after inspection

 

Sorry guys, been alittle busy over here . Hey Ren ???? do you have a TII parts car over there . Im looking for some front end parts??? The exaust work mentioned above is fairly simple . please explain (in detail ) what you need done / what parts you need or already have . Ren give me a call if you need anything


Va

 

Killa,
There are lots of things to learn about with RX7's that are unique. If you are new to RX7's you should definately read as much of Felix's FAQ as possible. It will make your life with these cars much mroe pleasnt.

Ren,
Do you still have the 2nd gen oil pan on that engine, or do you have the GSLSE oil pan? If you have the 2nd gen, you will have a much happier life with it if you change it. I have an extra. Make me an offer.

I have finally posted some more pictures from the track weekend at Summit Point:

http://www.highrpm.net/photos/thumbnails.php?album=22

Some on the track pics this time. Pics of the Ferrari we were running with. First time I have seen a Ferrari that was well driven at a track event.

 

Are you close to being ready for Langley, the pics you posted are awsome , I really need to go to one of those events .

Let me know what you think


Va

 

Probably. I have found much in the way of tune of my car fiddling with it this week. I have improved the fuel mileage pretty significantly. Runs much better too. I think now I might have gotten several MPH more on the straights at the track event, something I really needed. I need some info on how much we can gain by advancing the timing on a NA 13B. I know there is much to be gained, but I don't want to hurt it either.

My only hold up from going over there right now is I have a slow leak on one of my tires. I think I can get that repaired this weekend though.